Features

• AEC-Q100 Grade 0 Qualified
• Quiescent Current: Sleep Mode: 5 μA Typical Standby Mode: < 200 μA
• Sleep Mode: 5 μA Typical
• Standby Mode: < 200 μA
• LIN Transceiver Interface LIN Bus Specifications 1.3 and 2.2 Compliant SAE J2602 Compliant  Dominate State Time Out Supports Baud Rates up to 20K baud Internal pull-up resistor and diode Protected against ground shorts and against loss of ground Automatic thermal shutdown
• LIN Bus Specifications 1.3 and 2.2 Compliant
• SAE J2602 Compliant
• Dominate State Time Out
• Supports Baud Rates up to 20K baud
• Internal pull-up resistor and diode
• Protected against ground shorts and against loss of ground
• Automatic thermal shutdown
• Three Half-bridge Drivers Configured to Drive External High-Side NMOS and Low-Side NMOS MOSFETs Independent input control for high-side NMOS and low-side NMOS MOSFETs Peak output current: 0.5A @ 12V Shoot-through protection Overcurrent and short circuit protection
• Independent input control for high-side NMOS and low-side NMOS MOSFETs
• Peak output current: 0.5A @ 12V
• Shoot-through protection
• Overcurrent and short circuit protection
• Fixed Output Linear Regulators: 5V @ 30 mA 12V @ 30 mA
• 5V @ 30 mA
• 12V @ 30 mA
• Integrated Operational Amplifier
• Overcurrent Comparator With DAC Reference
• Phase Comparator With Multiplexer
• Neutral Simulator
• Adjustable Output Buck Regulator (750 mW)
• Operational Voltage Range: 6V-19V
• Buck Regulator Undervoltage Lockout: 4.0V
• Undervoltage Lockout (UVLO): 5.5V
• Overvoltage Lockout (OVLO): 20V
• Transient (100 ms) Voltage Tolerance: 48V
• Extended Temperature Range: TA = -40°C to +150°C or TA = -40°C to +125°C
• Thermal Warning and Shutdown

Parameter