MIC2176

The Micrel MIC2176-1/-2/-3 is a family of constant-frequency, synchronous buck controllers featuring a unique digitally modified adaptive ON-time control architecture. The MIC2176 family operates over an input supply range of 4.5V to 75V and can be used to supply up to 15A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%, and the device operates at a constant switching frequency of 100kHz, 200kHz, and 300kHz.

Micrel's Hyper Speed Control™ architecture allows for ultra-fast transient response while reducing the output capacitance and also makes (High VIN)/(Low VOUT) operation possible. This digitally modified adaptive tON ripple control architecture combines the advantages of fixed-frequency operation and fast transient response in a single device.

The MIC2176 offers a full suite of protection features to ensure protection of the IC during fault conditions. These include undervoltage lockout to ensure proper operation under power-sag conditions, internal soft-start to reduce inrush current, fold-back current limit, "hiccup" mode short-circuit protection and thermal shutdown.

Features
  • Hyper Speed Control™ architecture enables
  • High delta V operation (VIN = 75V and VOUT = 1.2V)
  • Small output capacitance
  • 4.5V to 75V input voltage
  • Output down to 0.8V with ±1% accuracy
  • Any Capacitor™ stable
  • Zero-ESR to high-ESR output capacitance
  • 100kHz/200kHz/300kHz switching frequency
  • Internal compensation
  • 6ms Internal soft-start
  • Foldback current limit and "hiccup" mode short-circuit protection
  • Thermal shutdown
  • Supports safe start-up into a pre-biased output
  • -40°C to +125°C junction temperature range
  • Available in 10-pin MSOP package
Parameter
Parameter Name Value Value
Supported Topologies Sync. Buck Sync. Buck
Supported Outputs 1 1
Minimum Input Voltage (V) 4.5 4.5
Maximum Input Voltage (V) 75 75
Minimum Output Voltage (V) 0.8 0.8
Typical Tolerance (%) ±1 ±1
Operating Frequency (Hz) 100K, 200K, or 300k 100K, 200K, or 300k
Soft Start True True
Internal Compensation True True
Internal Voltage Bias True True
Enable Pin True True
Current Limit / Short Circuit Protection True True
Input UVLO Typ (V) 3.85 3.85
Operating Supply Current (mA) 1.4 1.4
Iq Off (µA) 700 700
Package 10/MSOP 10/MSOP
Documents
MIC2176-1/-2/-3 - Wide Input Voltage, Synchronous Buck Ctrls feat. Adap On-TimeData Sheets11/05/20151117KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC2176-1YMM-TR10MSOP-40C to +125CT/R1.801.501.361.321.30
MIC2176-2YMM10MSOP-40C to +125CTUBE**********
MIC2176-2YMM-TR10MSOP-40C to +125CT/R1.801.501.361.321.30
MIC2176-3YMM10MSOP-40C to +125CTUBE**********
相关开发工具
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC2176-1YMM0.0245000.13560010MSOP3x3x1.0mmNiPdAue4
MIC2176-1YMM-TR0.0245000.43118010MSOP3x3x1.0mmNiPdAue4
MIC2176-2YMM0.0245000.13560010MSOP3x3x1.0mmNiPdAue4
MIC2176-2YMM-TR0.0245000.43118010MSOP3x3x1.0mmNiPdAue4
MIC2176-3YMM0.0245000.13560010MSOP3x3x1.0mmNiPdAue4
MIC2176-3YMM-TR0.0245000.43118010MSOP3x3x1.0mmNiPdAue4
MIC2176-1/-2/-3 - Wide Input Voltage, Synchronous Buck Ctrls feat. Adap On-Time MIC2176