MIC24053
The Micrel MIC24053 is a constant-frequency, synchronous buck regulator featuring a unique adaptive on-time control architecture. The MIC24053 operates over an input supply range of 4.5V to 19V and provides a regulated output of up to 9A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%, and the device operates at a switching frequency of 600kHz.
Hyper Speed Control™ architecture allows for ultra-fast transient response while reducing the output capacitance and also makes (High VIN)/(Low VOUT) operation possible. This adaptive tON ripple control architecture combines the advantages of fixed-frequency operation and fast transient response in a single device.
The MIC24053 offers a full suite of features to ensure protection of the IC during fault conditions. These include undervoltage lockout to ensure proper operation under power-sag conditions, internal soft-start to reduce inrush current, foldback current limit, "hiccup mode" short-circuit protection, and thermal shutdown. An open-drain Power Good (PG) pin is provided. The 9A Hyper Light Load® part, MIC24054, is also available.
Features- Hyper Speed Control™ architecture enables
- High delta V operation (VIN = 19V and VOUT = 0.8V)
- Small output capacitance
- Input voltage range: 4.5V to 19V
- Output current up to 9A, up to 95% efficiency
- Adjustable output voltage from 0.8V to 5.5V
- ±1% feedback accuracy
- Any Capacitor™ stable - zero-to-high ESR
- 600kHz switching frequency
- No external compensation
- Power Good (PG) output
- Foldback current-limit and "hiccup" mode short-circuit protection
- Supports safe start-up into pre-biased loads
- -40°C to +125°C junction temperature range
- Available in 28-pin 5mm — 6mm QFN package
| Parameter
Parameter Name
Value
| Value |
Regulator Type
Step Down (Buck)
|
Step Down (Buck)
|
# of Outputs
1
|
1
|
Input Voltage Range Min (V)
4.5
|
4.5
|
Input Voltage Range Max (V)
19
|
19
|
Output Voltage Range Min (V)
0.8
|
0.8
|
Output Voltage Range Max (V)
5.5
|
5.5
|
Output Current (A) max
9
|
9
|
Quiescent Current (mA) typ
0.73
|
0.73
|
Switching Frequency (kHz)
600
|
600
|
Synchronous Rectifier
Yes
|
Yes
|
Operating Temp Range
-40 to 125
|
-40 to 125
|
Vfb (V)
0.8
|
0.8
|
Duty Cycle Max (%)
0.82
|
0.82
|
SHUTDOWN Current (µA) (Typ)
5
|
5
|
|
Documents
MIC24053 - 12V, 9A High-Efficiency Buck Regulator | Data Sheets | 11/09/2015 | 1403KB | |
|
Micrel AN 105 - Troubleshooting Switching Power Supplies | AppNote | 10/02/2015 | 177KB | |
Micrel AN 39 - How to Power GSM/GPRS/EDGE/3G/HSPA M2M Modems | AppNote | 10/01/2015 | 1403KB | |
Micrel AN 87 - Putting Adaptive Constant-ON-Time Buck ICs and Modules to Work in Inverting Buck-Boost Converters | AppNote | 10/02/2015 | 509KB | |
Micrel ANLPS207 - Putting Adaptive Constant-On-Time Buck ICs and Modules to Work in Inverting Buck-Boost Converters | AppNote | 11/16/2015 | 509KB | |
Micrel ANLPS300 - How to Power GSM/GPRS/EDGE/3G/HSPA M2M Modems | AppNote | 11/16/2015 | 1403KB | |
Ordering Information
Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
---|
MIC24053YJL-TR | 28 | VQFN | -40C to +125C | T/R | 1.61 | 1.35 | 1.22 | 1.18 | 1.17 |
相关开发工具
RoHS Information
PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
---|
MIC24053YJL-TR | 0.081600 | 0.227180 | 28 | VQFN | 5x6x0.9mm | NiPdAu | e4 | | |