MIC2790

The MIC2790/1/3 is ideal for monitoring highly-accurate core voltages that require rapid response in the event of a fault condition. The voltage supervisor IC features a manual reset input, enable input (MIC2793 only), a capacitor-programmable reset timeout delay and both an active-low and active-high reset output. The MIC2790/1/3 monitors system voltages that are in the range of 0.4V to 5.5V, with a typical sense accuracy of 0.5% at +25°C and ±1.0% across −40°C to +125°C. The IC asserts a reset output when the sense voltage drops below the threshold or when the manual reset is pulled to a logic low. The active-low reset stays low for the duration of the reset timeout delay once the sense voltage returns to normal and the manual reset transitions to a logic high state. The reset timeout delay period is programmable from 1ms to 10s with an external capacitor. The MIC2790/1/3 operates from a low supply voltage of 1.5V to 5.5V, and is rated to operate over the temperature range of −40°C to +125°C. The MIC2790 is available in a 6-pin TSOT-23 package or a 6-pin 2mm × 2mm × 0.55mm DFN package. The MIC2791 is available in a tiny 6-pin 1.6mm × 1.6mm × 0.55mm DFN package. The MIC2793 is available in a 8-pin 2mm × 2mm × 0.55mm DFN package.

Features
  • 1.5V to 5.5V operating supply voltage range
  • Ultra-fast propagation delay (1µs typically)
  • 0.4V reference voltage (SNS pin) ±1.0% threshold accuracy from −40°C to +125°C Monitored voltage range from 0.4V to 5.5V
  • ±1.0% threshold accuracy from −40°C to +125°C
  • Monitored voltage range from 0.4V to 5.5V
  • Programmable reset timeout delay (from 1ms to 10s)
  • Manual reset input with an internal pull-up resistor
  • Active-high enable input pin (MIC2793 only)
  • The MIC2790/1/3 features multiple output options:
  • Open-drain active-low (/RESET)
  • Push-pull active-low (/RESET)
  • Push-pull active-high (RESET)
  • -40°C to +125°C junction temperature range
  • 6-pin TSOT-23 (MIC2790)
  • 6-pin 2mm × 2mm Thin DFN (MIC2790)
  • 6-pin 1.6mm × 1.6mm Thin DFN (MIC2791)
  • 8-pin 2mm × 2mm Thin DFN (MIC2793)
Parameter
Parameter Name Value Value
Manual Reset Yes Yes
Typical Reset Pulse Width (ms) 1 1
Reset Type Active-Low/Open-Drain/Push-Pull, Active-High/Push-Pull Active-Low/Open-Drain/Push-Pull, Active-High/Push-Pull
Typical Supply Current (uA) 40 40
Nominal Reset Voltage (V) 0.4 0.4
Product Type Pushbutton reset Ics Pushbutton reset Ics
Documents
MIC2790/1/3 - Supervisor with High-Accuracy, Ultra-Fast Propagation DelayData Sheets11/09/2015766KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC2790N-04VMT-TR6UDFN-40C to +125CT/R**********
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC2790H-04VD6-TR0.1496006TSOT2.9x1.6x1.0mmNiPdAue4
MIC2790N-04VD6-T50.1496006TSOT2.9x1.6x1.0mmNiPdAue4
MIC2790N-04VD6-TR0.1496006TSOT2.9x1.6x1.0mmNiPdAue4
MIC2790L-04VD6-T50.1496006TSOT2.9x1.6x1.0mmNiPdAue4
MIC2790L-04VD6-TR0.1496006TSOT2.9x1.6x1.0mmNiPdAue4
MIC2790H-04VD6-T50.1496006TSOT2.9x1.6x1.0mmNiPdAue4
MIC2790N-04VMT-T50.0067000.7140506UDFN2x2x.06mmNiPdAue4
MIC2790N-04VMT-TR0.0067000.7140506UDFN2x2x.06mmNiPdAue4
MIC2790/1/3 - Supervisor with High-Accuracy, Ultra-Fast Propagation Delay MIC2793
Products 产品服务
Manufacturers 生产厂家
Sales 联系购买
©1993 - 2024 BDTIC