MIC29752

The MIC29150/29300/29500/29750 are high-current, high-accuracy, low-dropout voltage regulators. Using Micrel's proprietary Super βeta PNP® process with a PNP pass element, these regulators feature 350mV to 425mV (full load) typical dropout voltages and very low ground current. Designed for high-current loads, these devices also find applications in lower current, extremely low dropout-critical systems, where their tiny dropout voltage and ground current values are important attributes.

The MIC29150/29300/29500/29750 are fully protected against overcurrent faults, reversed input polarity, reversed lead insertion, over-temperature operation, and positive and negative transient voltage spikes. Five-pin fixed voltage versions feature logic-level on/off control and an error flag which signals whenever the output falls out of regulation. Flagged states include low input voltage (dropout), output current limit, over-temperature shutdown, and extremely high voltage spikes on the input.

On the MIC29xx1 and MIC29xx2, the enable pin may be tied to VIN if it is not required for on/off control. The MIC29150/29300/29500 are available in 3-pin and 5-pin TO-220 and surface-mount TO-263 (D2Pak) packages.

The MIC29750 7.5A regulators are available in 3-pin and 5-pin TO-247 packages. The 1.5A, adjustable output MIC29152 is available in a 5-pin power D-Pak (TO-252) package.

For applications with an input voltage of 6V or below, see MIC37xxx LDOs.

Features
  • High current capability MIC29150/29151/29152/29153: 1.5A MIC29300/29301/29302/29303: 3A MIC29500/29501/29502/29503: 5A MIC29750/29751/29752: 7.5A
  • MIC29150/29151/29152/29153: 1.5A
  • MIC29300/29301/29302/29303: 3A
  • MIC29500/29501/29502/29503: 5A
  • MIC29750/29751/29752: 7.5A
  • Low dropout voltage
  • Low ground current
  • Accurate 1% guaranteed tolerance
  • Extremely fast transient response
  • Reverse-battery and load dump protection
  • Zero-current shutdown mode (5-pin versions)
  • Error flag signals output out-of-regulation (5-pin versions)
  • Also characterized for smaller loads with industry-leading performance specifications
  • Fixed voltage and adjustable versions
Parameter
Parameter Name Value Value
Product Type Single LDOs Single LDOs
# of Out 1 1
IOUT #1
IOUT #2
IOUT #3
IOUT #4
IOUT (mA) 7500 7500
VIN Min (V) 2.5 2.5
VIN Max (V) 26 26
VOUT (V) Adj Adj
Voltage Drop Typ (mV) 425 425
IGND Typ (µA) 12 12
Tol Typ % ±1 ±1
Noise (µV) rms 260 260
Soft Start Pin
Load Dump Yes Yes
Rev Bat Yes Yes
Reverse Current Protect Yes Yes
Documents
MIC29150/29300/29500/29750 - High-Current Low-Dropout RegulatorsData Sheets11/09/2015835KB
Micrel AN 12 - Design Considerations for 5V to 3.3V Pass RegulatorsAppNote10/01/201528KB
Micrel AN 43 - Improving Adjustable Regulator AccuracyAppNote10/01/201559KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC29752WWT5TO-247-40C to +125CTUBE15.2612.7211.5611.1711.04
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC29752WWT7.2400005TO-247-Matte Tine3
MIC29150/29300/29500/29750 - High-Current Low-Dropout Regulators MIC29752
Micrel AN 12 MIC29752
Micrel AN 43 MIC29752