MIC4125

The MIC4123/4124/4125 family are highly reliable BiCMOS/DMOS buffer/driver/MOSFET drivers. They are higher output current versions of the MIC4126/4127/4128, which are improved versions of the MIC4426/4427/4428. All three families are pin-compatible. The MIC4123/4124/4125 drivers are capable of giving reliable service in more demanding electrical environments than their predecessors. They will not latch under any conditions within their power and voltage ratings. They can survive up to 5V of noise spiking, of either polarity, on the ground pin. They can accept, without either damage or logic upset, up to half an amp of reverse current (either polarity) forced back into their outputs. The MIC4123/4124/4125 series drivers are easier to use, more flexible in operation, and more forgiving than other CMOS or bipolar drivers currently available. Their BiCMOS/DMOS construction dissipates minimum power and provides rail-to-rail voltage swings. Primarily intended for driving power MOSFETs, the MIC4123/4124/4125 drivers are suitable for driving otherloads (capacitive, resistive, or inductive) which require low impedance, high peak currents, and fast switching times. Heavily loaded clocklines, coaxial cables, or piezoelectric transducers are some examples. The only known limitation on loading is that total power dissipated in the driver must be kept within the maximum power dissipation limits of the package.

Features
  • Reliable, low-power bipolar/CMOS/DMOS construction
  • Latch-up protected to >200mA reverse current
  • Logic input withstands swing to -5V
  • High 3A peak output current
  • Wide 4.5V to 20V operating range
  • Drives 1800pF capacitance in 25ns
  • Short <50ns typical delay time
  • Delay times consistent with in supply voltage change
  • Matched rise and fall times
  • TTL logic input independent of supply voltage
  • Low equivalent 6pF input capacitance
  • Low supply current
  • 3.5mA with logic 1 input
  • 350µA with logic 0 input
  • Low 2.3Ω typical output impedance
  • Output voltage swings within 25mV of ground or VS.
  • '426/7/8-, '1426/7/8-, '4426/7/8-compatible pinout
  • Inverting, noninverting, and differential configurations
  • Exposed backside pad packaging reduces heat ePad SOIC-8L (θJA = 58°C/W) 4mm x 4mm MLF®-8L (θJA = 45°C/W)
Parameter
Parameter Name Value Value
MOSFET Driver Type Low Side Low Side
Driver Type Dual Dual
Configuration Complimentary Complimentary
Peak Output Current (source/sink, A) 3.0/3.0 3.0/3.0
Output Resistance (source/sink, Ω) 5/5 5/5
Maximum Supply Voltage (V) 20 20
Propagation Delay (Td1/Td2, ns) 44/59 44/59
Rise/Fall Time (Tr/Tf, ns) 11/11 11/11
Capacitive Load Drive 1,800 pF in 11 ns 1,800 pF in 11 ns
Documents
MIC4123/4124/4125 Data SheetData Sheets11/05/2015358KB
Micrel AN 59 - MIC2145 Low Power POE Flyback ConverterAppNote10/02/2015129KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MIC4125YME8SOIC-40C to +125CTUBE1.401.161.061.021.01
MIC4125YME-TR8SOIC-40C to +125CT/R1.401.161.061.021.01
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC4125YME0.1857908SOIC3.9mmMatte Tine3
MIC4125YME-TR0.7006028SOIC3.9mmMatte Tine3
MIC4125YML-TR0.0431000.1496048VDFN4x4x0.9mmNiPdAue4
MIC4123/4124/4125 Data Sheet MIC4125
Micrel AN 59 MIC4125