MIC4415 _ BDTIC a Leading Distributor in China

MIC4415

The MIC4414 and MIC4415 are low-side MOSFET drivers designed to switch an N-channel enhancement type MOSFET in low-side switch applications. The MIC4414 is a non-inverting driver and the MIC4415 is an inverting driver. These drivers feature short delays and high peak current to produce precise edges and rapid rise and fall times. The MIC4414/15 are powered from a 4.5V to 18V supply and can sink and source peak currents up to 1.5A, switching a 1000pF capacitor in 12ns. The on-state gate drive output voltage is approximately equal to the supply voltage (no internal regulators or clamps). High supply voltages, such as 10V, are appropriate for use with standard N-channel MOSFETs. Low supply voltages, such as 5V, are appropriate for use with many logic-level N-channel MOSFETs. In a low-side configuration, the driver can control a MOSFET that switches any voltage up to the rating of the MOSFET. The MIC4414 and MIC4415 are available in an ultra-small 4-pin 1.2mm x 1.2mm thin QFN package and is rated for –40°C to +125°C junction temperature range.

Features

Ultra-small 4-pin 1.2mm x 1.2mm thin QFN package
+4.5V to +18V operating supply voltage range
1.5A peak current
3.5Ω output resistance at 18V
9Ω output resistance at 5V
Low steady-state supply current
77µA control input low
445µA control input high
12ns rise and fall times into 1000pF load
MIC4414 (non-inverting)
MIC4415 (inverting)
-40°C to +125°C junction temperature range

Parameter

Parameter Name Value	Value
MOSFET Driver Type Low Side	Low Side
Driver Type Single	Single
Configuration Inverting	Inverting
Peak Output Current (source/sink, A) 1.5/1.5	1.5/1.5
Output Resistance (source/sink, Ω) 3.5/3.5	3.5/3.5
Maximum Supply Voltage (V) 18	18
Propagation Delay (Td1/Td2, ns) 12/12	12/12
Rise/Fall Time (Tr/Tf, ns) 12/12	12/12
Capacitive Load Drive 1000 pF in 12 ns	1000 pF in 12 ns
Features Very small footprint	Very small footprint