MIC4420
MIC4420, MIC4429 and MIC429 MOSFET drivers are tough, efficient, and easy to use. The MIC4429 and MIC429 are inverting drivers, while the MIC4420 is a non-inverting driver.
They are capable of 6A (peak) output and can drive the largest MOSFETs with an improved safe operating margin. The MIC4420/4429/429 accepts any logic input from 2.4V to VS without external speed-up capacitors or resistor networks. Proprietary circuits allow the input to swing negative by as much as 5V without damaging the part. Additional circuits protect against damage from electrostatic discharge.
MIC4420/4429/429 drivers can replace three or more discrete components, reducing PCB area requirements, simplifying product design, and reducing assembly cost.
Modern BiCMOS/DMOS construction guarantees freedom from latch-up. The rail-to-rail swing capability helps ensure adequate gate voltage to the MOSFET during power up/down sequencing.
Note: See MIC4120/4129 for high power and narrow pulse applications.
Features- CMOS construction
- Latch-up protected: will withstand >500mA reverse output current
- Logic input withstands negative swing of up to 5V
- Matched rise and fall times of 25ns
- High peak output current at 6A
- Wide operating range from 4.5V to 18V
- High capacitive load drive of 10,000pF
- Low delay time of 55ns typical
- Low delay time 55ns typ.
- Logic high input for any voltage from 2.4V to VS
- Low equivalent input capacitance (typ.) 6pF
- Low supply current 450µA with logic 1 input
- Low output impedance 2.5Ω
- Output voltage swing within 25mV of ground or VS
| Parameter|
Parameter Name
Value
| Value | |
MOSFET Driver Type
Low Side
|
Low Side
| |
Driver Type
Single
|
Single
| |
Configuration
Non-Inverting
|
Non-Inverting
| |
Peak Output Current (source/sink, A)
6.0/6.0
|
6.0/6.0
| |
Output Resistance (source/sink, Ω)
2.8/2.5
|
2.8/2.5
| |
Maximum Supply Voltage (V)
18
|
18
| |
Propagation Delay (Td1/Td2, ns)
18/48
|
18/48
| |
Rise/Fall Time (Tr/Tf, ns)
12/13
|
12/13
| |
Capacitive Load Drive
2200 pF in 12 ns
|
2200 pF in 12 ns
|
|
Documents
| MIC4420/4429 Data Sheet | Data Sheets | 11/05/2015 | 225KB | |
|
| Micrel AN 16 - Designing with Low-Side MOSFET Drivers | AppNote | 10/01/2015 | 61KB |  |
Ordering Information
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| MIC4420YM | 8 | SOIC | -40C to +85C | TUBE | 0.79 | 0.66 | 0.60 | 0.50 | 0.46 |
| MIC4420YMM | 8 | MSOP | -40C to +85C | TUBE | ** | ** | ** | ** | ** |
| MIC4420YMM-TR | 8 | MSOP | -40C to +85C | T/R | 0.79 | 0.66 | 0.60 | 0.50 | 0.46 |
| MIC4420YM-TR | 8 | SOIC | -40C to +85C | T/R | 0.79 | 0.66 | 0.60 | 0.50 | 0.46 |
| MIC4420YN | 8 | PDIP | -40C to +85C | TUBE | 1.11 | 0.92 | 0.84 | 0.70 | 0.65 |
| MIC4420ZM-TR | 8 | SOIC | 0C to +70C | T/R | 0.79 | 0.66 | 0.60 | 0.50 | 0.46 |
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| MIC4420YN | 0.486700 | 0.900000 | 8 | PDIP | .300in | Matte Tin | e3 |  |  |
| MIC4420ZN | 0.486700 | 0.900000 | 8 | PDIP | .300in | Matte Tin | e3 | | |
| MIC4420ZT | 1.983900 | 3.120000 | 5 | TO-220 | - | Matte Tin | e3 | | |
| MIC4420YM | 0.075000 | 0.163265 | 8 | SOIC | 3.90mm(.150in) | NiPdAu | e4 | | |
| MIC4420YM-TR | 0.075000 | 0.250000 | 8 | SOIC | 3.90mm(.150in) | NiPdAu | e4 | | |
| MIC4420ZM | 0.075000 | 0.163265 | 8 | SOIC | 3.90mm(.150in) | NiPdAu | e4 | | |
| MIC4420ZM-TR | 0.075000 | 0.250000 | 8 | SOIC | 3.90mm(.150in) | NiPdAu | e4 | | |
| MIC4420YMM | 0.025100 | 0.124600 | 8 | MSOP | 3x3x1.0mm | NiPdAu | e4 | | |
| MIC4420YMM-TR | 0.025100 | 0.334700 | 8 | MSOP | 3x3x1.0mm | NiPdAu | e4 | | |
