MIC4468
The MIC4467/8/9 family of 4-output CMOS buffer/drivers is an expansion from the earlier single- and dual-output drivers, to which they are functionally closely related. Because package pin count permitted it, each driver has been equipped with a 2-input logic gate for added flexibility. Placing four high-power drivers in a single package also improves system reliability and reduces total system cost. In some applications, one of these drivers can replace not only two packages of single-input drivers, but some of the associated logic as well.
Although primarily intended for driving power MOSFETs, and similar highly capacitive loads, these drivers are equally well suited to driving any other load (capacitive, resistive, or inductive), which requires a high-efficiency, low-impedance driver capable of high peak currents, rail-to-rail voltage swings, and fast switching times. For example, heavily loaded clock lines, coaxial cables, and piezoelectric transducers can all be driven easily with MIC446X series drivers. The only limitation on loading is that total power dissipation in the IC must be kept within the power dissipation limits of the package.
The MIC446X series drivers are built using a BCD process. They will not latch under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (either polarity) occurs on the ground line. They can accept up to half an amp of inductive kickback current (either polarity) into their outputs without damage or logic upset.
Features- Built using reliable, low power CMOS processes
- Latchproof: withstands 500mA inductive kickback
- Three input logic choices
- Symmetrical rise and fall times 25ns
- Short, equal delay times 75ns
- High peak output current 1.2A
- Wide operating range 4.5 to 18V
- Low equivalent input capacitance (typ) 6pF
- Inputs = Logic 1 for any input from 2.4V to VS
- ESD protected
| Parameter|
Parameter Name
Value
| Value | |
MOSFET Driver Type
Low Side
|
Low Side
| |
Driver Type
Quad
|
Quad
| |
Configuration
Non-inverting
|
Non-inverting
| |
Peak Output Current (source/sink, A)
1.2/1.2
|
1.2/1.2
| |
Output Resistance (source/sink, Ω)
5/5
|
5/5
| |
Maximum Supply Voltage (V)
18
|
18
| |
Propagation Delay (Td1/Td2, ns)
35/55
|
35/55
| |
Rise/Fall Time (Tr/Tf, ns)
5/5
|
5/5
| |
Capacitive Load Drive
470 pF in 14 ns
|
470 pF in 14 ns
| |
Features
Latch-up Protected; Input to –5V
|
Latch-up Protected; Input to –5V
|
|
Documents
Ordering Information
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| MIC4468YWM | 16 | SOIC | -40C to +85C | TUBE | 3.69 | 3.08 | 2.80 | 2.33 | 2.15 |
| MIC4468YWM-TR | 16 | SOIC | -40C to +85C | T/R | 3.69 | 3.08 | 2.80 | 2.33 | 2.15 |
| MIC4468ZWM-TR | 16 | SOIC | 0C to +70C | T/R | 3.54 | 2.95 | 2.68 | 2.23 | 2.06 |
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| MIC4468YN | 0.953300 | 1.833333 | 14 | PDIP | .300in | Matte Tin | e3 |  |  |
| MIC4468ZN | 0.953300 | 1.833333 | 14 | PDIP | .300in | Matte Tin | e3 | | |
| MIC4468YWM | 0.438000 | 0.765957 | 16 | SOIC | .300 In | Matte Tin | e3 | | |
| MIC4468YWM-TR | 0.438000 | 0.800000 | 16 | SOIC | .300 In | Matte Tin | e3 | | |
| MIC4468ZWM | 0.438000 | 0.765957 | 16 | SOIC | .300 In | Matte Tin | e3 | | |
| MIC4468ZWM-TR | 0.438000 | 0.800000 | 16 | SOIC | .300 In | Matte Tin | e3 | | |
