技术参数

Programmer

• MPLAB PM3 Universal Device Programmer (DV007004)

技术特性

• Single Voltage Read and Write Operations– 2.7-3.6V
• Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3
• High Speed Clock Frequency– 80 MHz Max
• Superior Reliability– Endurance: 100,000 Cycles (typical)– Greater than 100 years Data Retention
• Low Power Consumption:– Active Read Current: 10 mA (typical)– Standby Current: 5 µA (typical)
• Flexible Erase Capability– Uniform 4 KByte sectors– Uniform 32 KByte overlay blocks– Uniform 64 KByte overlay blocks
• Fast Erase and Byte-Program:– Chip-Erase Time: 35 ms (typical)– Sector-/Block-Erase Time: 18 ms (typical)– Byte-Program Time: 7 µs (typical)
• Auto Address Increment (AAI) Word Programming– Decrease total chip programming time overByte-Program operations
• End-of-Write Detection– Software polling the BUSY bit in Status Register– Busy Status readout on SO pin
• Hold Pin (HOLD#)– Suspends a serial sequence to the memorywithout deselecting the device
• Write Protection (WP#)– Enables/Disables the Lock-Down function of thestatus register
• Software Write Protection– Write protection through Block-Protection bits instatus register
• Temperature Range– Industrial: -40°C to +85°C
• Packages Available– 8-lead SOIC (200 mils)– 8-contact WSON (5 X 6 mm)
• All devices are RoHS compliant