74CBTLV1G125GF: Single bus switch
The 74CBTLV1G125 provides a single high-speed line switch. The switch is disabled
when the output enable (OE) input is high.
To ensure the high-impedance OFF-state during power-up or power-down, tie OE to the
VCC through a pull-up resistor. The current-sinking capability of the driver determines the
minimum value of the resistor.
Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall
times across the entire VCC range from 2.3 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF.
The IOFF circuitry disables the output, preventing the damaging backflow current through
the device when it is powered down.
74CBTLV1G125GF: Product Block Diagram
Outline 3d SOT891
Data Sheets (1)
| Name/Description | Modified Date |
|---|
| Single bus switch (REV 4.0) PDF (260.0 kB) 74CBTLV1G125 [English] | 05 Sep 2012 |
Application Notes (1)
Brochures (2)
Package Information (1)
Packing (1)
Supporting Information (2)
Ordering Information
| Product | Status | Family | Function | VCC (V) | VPASS (V) | Description | Package version | Logic switching levels | RON (Ohm) | f(-3dB) (MHz) | No of bits | tpd (ns) | Power dissipation considerations | Tamb (Cel) | Rth(j-a) (K/W) | Ψth(j-top) (K/W) | Rth(j-c) (K/W) | Package name | No of pins |
|---|
| 74CBTLV1G125GF | Active | CBTLV(D) | single bus switch | 2.3 - 3.6 | 3.3 | single bus switch | SOT891 | CMOS / LVTTL | 7 | 400 | 1 | 0.2 | very Low | -40~125 | 303 | 7.3 | 153 | XSON6 | 6 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | IFR(FIT) | MTBF(hour) | MSL | MSL LF |
|---|
| 74CBTLV1G125GF | | SOT891 | Reflow_Soldering_Profile | Reel 7" Q1/T1, Q3/T4 | Active | 74CBTLV1G125GF,132
(9352 824 01132) | Standard Marking | 74CBTLV1G125GF |    | Always Pb-free | 144.9 | 3.29 | 3.04E8 | 1 | 1 |
