74CBTLV3253D: Dual 1-of-4 multiplexer/demultiplexer

The 74CBTLV3253 provides a dual 1-of-4 high-speed multiplexer/demultiplexer with two common select inputs (S0, S1) and two output enable inputs (1OE, 2OE). The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When pin nOE = LOW, one of the four switches is selected (low-impedance ON-state) with pins S0 and S1. When pin nOE = HIGH, all switches are in the high-impedance OFF-state, independent of pins S0 and S1.

To ensure the high-impedance OFF-state during power-up or power-down, nOE should be tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined by the current-sinking capability of the driver.

Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 2.3 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

sot109-1_3d
Data Sheets (1)
Name/DescriptionModified Date
Dual 1-of-4 multiplexer/demultiplexer (REV 4.0) PDF (168.0 kB) 74CBTLV3253 [English]19 Dec 2011
Brochures (2)
Name/DescriptionModified Date
電圧レベルシフタ (REV 1.1) PDF (3.1 MB) 75017511_JP [English]16 Feb 2015
Voltage translation: How to manage mixed-voltage designs with NXP® level translators (REV 1.0) PDF (2.6 MB) 75017511 [English]20 May 2014
Package Information (1)
Name/DescriptionModified Date
plastic small outline package; 16 leads; body width 3.9 mm (REV 1.0) PDF (192.0 kB) SOT109-1 [English]08 Feb 2016
Packing (1)
Name/DescriptionModified Date
SO16; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 4.0) PDF (210.0 kB) SOT109-1_118 [English]24 Apr 2013
Supporting Information (2)
Name/DescriptionModified Date
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW [English]08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE [English]08 Oct 2009
IBIS Model
Ordering Information
ProductStatusFamilyFunctionVCC (V)VPASS (V)DescriptionPackage versionLogic switching levelsRON (Ohm)f(-3dB) (MHz)No of bitstpd (ns)Power dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package nameNo of pins
74CBTLV3253DActiveCBTLV(D)dual 4:1 mux/demux2.3 - 3.63.3dual 4:1 mux/demuxSOT109-1CMOS / LVTTL740020.2very Low-40~125929.652SO1616
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRMSLMSL LF
74CBTLV3253DSOT109-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1Active74CBTLV3253D,118 (9352 899 98118)74CBTLV3253D74CBTLV3253DAlways Pb-free144.911
Dual 1-of-4 multiplexer/demultiplexer 74CBTLV3253PW
電圧レベルシフタ 74AVC16245DGG-Q100
Voltage translation: How to manage mixed-voltage designs with NXP® level translators 74AVC16245DGG-Q100
cbtlv3253 IBIS model 74CBTLV3253PW
plastic small outline package; 16 leads; body width 3.9 mm NPIC6C596A_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SO16; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... NPIC6C596A_Q100
SA614A