74CBTLV3861PW: 10-bit bus switch with output enable
The 74CBTLV3861 is a 10-bit bus switch with one output enable (OE) input. When OE is LOW, the switch is closed and port A is connected to the B port. When OE is HIGH, the switch is disabled.
To ensure the high-impedance OFF-state during power-up or power-down, OE should be tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined by the current-sinking capability of the driver.
Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 2.3 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
74CBTLV3861PW: Product Block Diagram
Outline 3d SOT355-1
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| 10-bit bus switch with output enable (REV 3.0) PDF (158.0 kB) 74CBTLV3861 [English] | 19 Dec 2011 |
Brochures (2)
| Name/Description | Modified Date |
|---|---|
| 電圧レベルシフタ (REV 1.1) PDF (3.1 MB) 75017511_JP [English] | 16 Feb 2015 |
| Voltage translation: How to manage mixed-voltage designs with NXP® level translators (REV 1.0) PDF (2.6 MB) 75017511 [English] | 20 May 2014 |
Selector Guides (2)
| Name/Description | Modified Date |
|---|---|
| ロジック製品セレクションガイド... (REV 1.0) PDF (38.3 MB) LOGIC_SELECTION_GUIDE_2015_JP [English] | 19 Nov 2015 |
| Logic selection guide 2016 (REV 1.1) PDF (15.3 MB) 75017285 [English] | 08 Jan 2015 |
Package Information (1)
| Name/Description | Modified Date |
|---|---|
| plastic thin shrink small outline package; 24 leads; body width 4.4 mm (REV 1.0) PDF (353.0 kB) SOT355-1 [English] | 08 Feb 2016 |
Packing (1)
| Name/Description | Modified Date |
|---|---|
| TSSOP24; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... (REV 4.1) PDF (227.0 kB) SOT355-1_118 [English] | 15 Apr 2013 |
Supporting Information (1)
| Name/Description | Modified Date |
|---|---|
| Footprint for wave soldering (REV 1.0) PDF (16.0 kB) SSOP-TSSOP-VSO-WAVE [English] | 08 Oct 2009 |
IBIS Model
- 74CBTLV3861 IBIS Model (REV 1.0) ibs CBTLV3861 11/11/2013
Ordering Information
| Product | Status | Family | VCC (V) | Function | Description | VPASS (V) | Package version | Logic switching levels | RON (Ohm) | f(-3dB) (MHz) | No of bits | tpd (ns) | Power dissipation considerations | Tamb (Cel) | Rth(j-a) (K/W) | Ψth(j-top) (K/W) | Rth(j-c) (K/W) | Package name | No of pins |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 74CBTLV3861PW | Active | CBTLV(D) | 2.3 - 3.6 | 10-bit bus switch | 10-bit bus switch | 3.3 | SOT355-1 | CMOS / LVTTL | 7 | 400 | 10 | 0.2 | very Low | -40~125 | 82 | 2.5 | 37 | TSSOP24 | 24 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 74CBTLV3861PW | | SOT355-1 | SSOP-TSSOP-VSO-WAVE | Reel 13" Q1/T1 | Active | 74CBTLV3861PW,118 (9352 940 92118) | CBTLV3861 | 74CBTLV3861PW |    | Always Pb-free | 144.9 | 1 | 1 |
- 10-bit bus switch with output enable 74CBTLV3861PW
- 電圧レベルシフタ 74AVC16245DGG-Q100
- Voltage translation: How to manage mixed-voltage designs with NXP® level translators 74AVC16245DGG-Q100
- ロジック製品セレクションガイド... 74LVC_H_245A_Q100
- Logic selection guide 2016 74LVC_H_245A_Q100
- 74CBTLV3861 IBIS Model 74CBTLV3861PW
- plastic thin shrink small outline package; 24 leads; body width 4.4 mm 74LVC4245A_Q100
- SSOP-TSSOP-VSO-WAVE LPC1114FDH28
- TSSOP24; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... 74LVC4245A_Q100
- 74AVCM162836DGG
- SA639DH
