74CBTLVD3861PW: 10-bit level-shifting bus switch with output enable
The 74CBTLVD3861 is a 10-bit 3.3 V to 1.8 V level translating bus switch with one output enable (OE) input. When OE is LOW, the switch is closed and port A is connected to the B port. When OE is HIGH, the switch is disabled.
To ensure the high-impedance OFF-state during power-up or power-down, OE should be tied to the VCC through a pull-up resistor. The minimum value of the resistor is determined by the current-sinking capability of the driver.
Schmitt trigger action at control input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 3.0 V to 3.6 V.
This device is fully specified for partial power-down applications using IOFF.
74CBTLVD3861PW: Product Block Diagram
Outline 3d SOT355-1
Data Sheets (1)
Brochures (2)
Selector Guides (2)
Package Information (1)
Packing (1)
Supporting Information (1)
IBIS Model
Ordering Information
Product | Status | Family | Function | VCC (V) | VPASS (V) | Description | Logic switching levels | Package version | RON (Ohm) | f(-3dB) (MHz) | No of bits | tpd (ns) | Power dissipation considerations | Tamb (Cel) | Rth(j-a) (K/W) | Ψth(j-top) (K/W) | Rth(j-c) (K/W) | Package name | No of pins |
---|
74CBTLVD3861PW | Active | CBTLV(D) | 10-bit bus switch level translator | 3.0 - 3.6 | 1.8 | 10-bit bus switch level translator | CMOS / LVTTL | SOT355-1 | 7 | 400 | 10 | 0.2 | very Low | -40~125 | 128 | 32.0 | | TSSOP24 | 24 |
Package Information
Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | MSL | MSL LF |
---|
74CBTLVD3861PW | | SOT355-1 | SSOP-TSSOP-VSO-WAVE | Reel 13" Q1/T1 | Active | 74CBTLVD3861PW,118
(9352 940 95118) | BTLVD3861 | 74CBTLVD3861PW | | Always Pb-free | 144.9 | 1 | 1 |