74HCT163D: Presettable synchronous 4-bit binary counter; synchronous reset

The 74HC163; 74HCT163 is a synchronous presettable binary counter with an internal look-head carry. Synchronous operation is provided by having all flip-flops clocked simultaneously on the positive-going edge of the clock (CP). The outputs (Q0 to Q3) of the counters may be preset to a HIGH or LOW. A LOW at the parallel enable input (PE) disables the counting action. It causes the data at the data inputs (D0 to D3) to be loaded into the counter on the positive-going edge of the clock. Preset takes place regardless of the levels at count enable inputs (CEP and CET). A LOW at the master reset input (MR) sets Q0 to Q3 LOW after the next positive-going transition on the clock input (CP). This action occurs regardless of the levels at input pins PE, CET and CEP. This synchronous reset feature enables the designer to modify the maximum count with only one external NAND gate. The look-ahead carry simplifies serial cascading of the counters. Both CEP and CET must be HIGH to count. The CET input is fed forward to enable the terminal count output (TC). The TC output thus enabled will produce a HIGH output pulse of a duration approximately equal to a HIGH output of Q0. This pulse can be used to enable the next cascaded stage. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

The CP to TC propagation delay and CEP to CP set-up time determine the maximum clock frequency for the cascaded counters according to the following formula:

fmax= (1) / (tP (max)(CP to TC) + tSU(CEP to CP) )

74HCT163D: Product Block Diagram
sot109-1_3d
Data Sheets (1)
Name/DescriptionModified Date
Presettable synchronous 4-bit binary counter; synchronous reset (REV 4.0) PDF (240.0 kB) 74HC_HCT163 [English]28 Dec 2015
Application Notes (2)
Name/DescriptionModified Date
Live Insertion Aspects of Philips Logic Families (REV 1.0) PDF (73.0 kB) AN252 [English]13 Mar 2013
Pin FMEA 74HC/74HCT family (REV 1.0) PDF (51.0 kB) AN11044 [English]16 Mar 2011
Users Guides (1)
Name/DescriptionModified Date
HC/T User Guide (REV 1.0) PDF (508.0 kB) HCT_USER_GUIDE [English]01 Nov 1997
Package Information (1)
Name/DescriptionModified Date
plastic small outline package; 16 leads; body width 3.9 mm (REV 1.0) PDF (192.0 kB) SOT109-1 [English]08 Feb 2016
Supporting Information (2)
Name/DescriptionModified Date
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW [English]08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE [English]08 Oct 2009
SPICE model
Ordering Information
ProductStatusFamilyVCC (V)FunctionOutput drive capability (mA)DescriptionPackage versionLogic switching levelstpd (ns)Power dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package nameNo of pins
74HCT163DActiveHC(T)4.5 - 5.5Binary counters/timers+/- 4.0TTL enabledSOT109-1TTL20low-40~125835.241SO1616
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
74HCT163DSOT109-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1 CECCActive74HCT163D,653 (9337 150 20653)74HCT163D74HCT163Dweek 6, 200484.96.621.51E811
Bulk Pack, CECCActive74HCT163D,652 (9337 150 20652)74HCT163D74HCT163Dweek 6, 200484.96.621.51E811
Presettable synchronous 4-bit binary counter; synchronous reset 74HCT163PW
Live Insertion Aspects of Philips Logic Families 74HC_T_245_Q100
Pin FMEA 74HC/74HCT family 74HC_T_597_Q100
HC/T User Guide 74HCU04PW
hc Spice model 74HCU04PW
plastic small outline package; 16 leads; body width 3.9 mm NPIC6C596A_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
74LVC161
SA614A