74HCT573BQ: Octal D-type transparent latch; 3-state
The 74HC573; 74HCT573 is an 8-bit D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
74HCT573BQ: Product Block Diagram
Outline 3d SOT764-1
Data Sheets (1)
| Name/Description | Modified Date |
|---|---|
| Octal D-type transparent latch; 3-state (REV 7.0) PDF (214.0 kB) 74HC_HCT573 [English] | 04 Mar 2016 |
Application Notes (3)
| Name/Description | Modified Date |
|---|---|
| A metastability primer (REV 1.0) PDF (40.0 kB) AN219 [English] | 13 Mar 2013 |
| Live Insertion Aspects of Philips Logic Families (REV 1.0) PDF (73.0 kB) AN252 [English] | 13 Mar 2013 |
| Pin FMEA 74HC/74HCT family (REV 1.0) PDF (51.0 kB) AN11044 [English] | 16 Mar 2011 |
Users Guides (1)
| Name/Description | Modified Date |
|---|---|
| HC/T User Guide (REV 1.0) PDF (508.0 kB) HCT_USER_GUIDE [English] | 01 Nov 1997 |
Package Information (1)
| Name/Description | Modified Date |
|---|---|
| plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 x 4.5 x... (REV 1.0) PDF (190.0 kB) SOT764-1 [English] | 08 Feb 2016 |
Packing (1)
| Name/Description | Modified Date |
|---|---|
| DHVQFN20; Reel pack; SMD, 7" Q1/T1 Standard product orientation Orderable part number ending ,115 or... (REV 4.0) PDF (203.0 kB) SOT764-1_115 [English] | 23 Apr 2013 |
Ordering Information
| Product | Status | Family | Function | VCC (V) | Description | Logic switching levels | Package version | Output drive capability (mA) | tpd (ns) | No of bits | Power dissipation considerations | Tamb (Cel) | Rth(j-a) (K/W) | Ψth(j-top) (K/W) | Rth(j-c) (K/W) | Package name | No of pins |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 74HCT573BQ | Active | HC(T) | Latches/registered drivers | 4.5 - 5.5 | TTL enabled (3-state) | TTL | SOT764-1 | +/- 6 | 17 | 8 | low | -40~125 | 79 | 9.4 | 50 | DHVQFN20 | 20 |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | EFR | IFR(FIT) | MTBF(hour) | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 74HCT573BQ | | SOT764-1 | Reel 7" Q1/T1 | Active | 74HCT573BQ,115 (9352 737 32115) | HCT573 | 74HCT573BQ |    | Always Pb-free | 84.9 | 6.62 | 1.51E8 | 1 | 1 |
- Octal D-type transparent latch; 3-state 74HCT573PW
- A metastability primer 74AHC573PW
- Live Insertion Aspects of Philips Logic Families 74HC_T_245_Q100
- Pin FMEA 74HC/74HCT family 74HC_T_597_Q100
- HC/T User Guide 74HCU04PW
- plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 x 4.5 x... 74LVC_H_245A_Q100
- DHVQFN20; Reel pack; SMD, 7" Q1/T1 Standard product orientation Orderable part number ending ,115 or... 74LVC_H_245A_Q100
- 74HC_T_573
- 74VHC_T_245
