74LVC162373ADGG: 16-bit D-type transparent latch

The 74LVC162373A and 74LVCH162373A are 16-bit D-type transparent latches with separate D-type inputs with bus hold (74LVCH162373A only) for each latch and 3-state outputs for bus-oriented applications. One latch enable (pin nLE) input and one output enable (pin nOE) are provided for each octal. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications. The device consists of two sections of eight D-type transparent latches with 3-state true outputs. When pin nLE is HIGH, data at the corresponding data inputs (pins nDn) enter the latches. In this condition, the latches are transparent, that is, the latch output changes each time its corresponding data inputs changes. When pin nLE is LOW, the latches store the information that was present at the data inputs a set-up time preceding the HIGH to LOW transition of pin nLE.When pin nOE is LOW, the contents of the eight latches are available at the outputs. When pin nOE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the nOE input does not affect the state of the latches.

The device is designed with 30 Ω series termination resistors in both HIGH and LOW output stages to reduce line noise. Bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.

74LVC162373ADGG: Product Block Diagram
Outline 3d SOT362-1
Data Sheets (1)
Name/DescriptionModified Date
16-bit D-type transparant latch; 30 Ohm series termination resistors; 5 V tolerant inputs/outputs; 3-state (REV 4.0) PDF (127.0 kB) 74LVC_LVCH162373A [English]14 May 2013
Application Notes (6)
Name/DescriptionModified Date
Sorting through the low voltage logic maze (REV 1.0) PDF (72.0 kB) AN10156 [English]13 Mar 2013
Package lead inductance considerations in high-speed applications (REV 1.0) PDF (43.0 kB) AN212 [English]13 Mar 2013
A metastability primer (REV 1.0) PDF (40.0 kB) AN219 [English]13 Mar 2013
Pin FMEA for LVC family (REV 1.0) PDF (44.0 kB) AN11009 [English]04 Feb 2011
Power considerations when using CMOS and BiCMOS logic devices (REV 1.0) PDF (100.0 kB) AN263 [English]05 Feb 2002
Interfacing 3 Volt and 5 Volt Applications (REV 1.0) PDF (63.0 kB) AN240 [English]15 Sep 1995
Selector Guides (2)
Name/DescriptionModified Date
ロジック製品セレクションガイド... (REV 1.0) PDF (38.3 MB) LOGIC_SELECTION_GUIDE_2015_JP [English]19 Nov 2015
Logic selection guide 2016 (REV 1.1) PDF (15.3 MB) 75017285 [English]08 Jan 2015
Package Information (1)
Name/DescriptionModified Date
plastic thin shrink small outline package; 48 leads; body width 6.1 mm (REV 1.0) PDF (467.0 kB) SOT362-1 [English]08 Feb 2016
Packing (1)
Name/DescriptionModified Date
TSSOP48; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... (REV 5.0) PDF (242.0 kB) SOT362-1_118 [English]15 Apr 2013
Supporting Information (1)
Name/DescriptionModified Date
Footprint for wave soldering (REV 1.0) PDF (16.0 kB) SSOP-TSSOP-VSO-WAVE [English]08 Oct 2009
IBIS Model
Ordering Information
ProductStatusFamilyVCC (V)FunctionLogic switching levelsDescriptionPackage versionOutput drive capability (mA)tpd (ns)No of bitsPower dissipation considerationsTamb (Cel)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package nameNo of pins
74LVC162373ADGGActiveLVC1.2 - 3.6Latches/registered driversTTL16-bit D-type transparent latch with 30 ohm termination resistors (3-state)SOT362-1+/- 123.216low-40~125822.037TSSOP4848
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
74LVC162373ADGGSOT362-1SSOP-TSSOP-VSO-WAVEBulk PackActive74LVC162373ADGG:11 (9352 377 20112)LVC162373A74LVC162373ADGGAlways Pb-free123.83.872.58E811
Reel 13" Q1/T1Active74LVC162373ADGG,11 (9352 377 20118)LVC162373A74LVC162373ADGGAlways Pb-free123.83.872.58E811
Reel 13" Q1/T1 in DrypackWithdrawn74LVC162373ADGG:51 (9352 377 20518)LVC162373A74LVC162373ADGGweek 14, 2005123.83.872.58E822
16-bit D-type transparant latch; 30 Ohm series termination resistors; 5 V tolerant inputs/outputs; 3-state 74LVC162373ADL
Sorting through the low voltage logic maze 74LVC_H_245A_Q100
Package lead inductance considerations in high-speed applications 74LVC_H_245A_Q100
A metastability primer 74AHC573PW
Pin FMEA for LVC family 74LVC1G123_Q100
Power considerations when using CMOS and BiCMOS logic devices 74AHCT244PW
Interfacing 3 Volt and 5 Volt Applications 74LVC377PW
ロジック製品セレクションガイド... 74LVC_H_245A_Q100
Logic selection guide 2016 74LVC_H_245A_Q100
lvc162373a IBIS model 74LVC162373ADL
plastic thin shrink small outline package; 48 leads; body width 6.1 mm 74LVC_H_16245A_Q100
SSOP-TSSOP-VSO-WAVE LPC1114FDH28
TSSOP48; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... 74LVC_H_16245A_Q100
74LVC_H_162373A
74LVTN16245B