• 简体中文
• English

LPC2468FET208: Single-chip 16-bit/32-bit micro; 512 kB flash, Ethernet, CAN, ISP/IAP, USB 2.0 device/host/OTG, external memory interface

NXP® Semiconductors designed the LPC2468 microcontroller around a 16-bit/32-bit ARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG and embedded trace. The LPC2468 has 512 kB of on-chip high-speed flash memory. This flash memory includes a special 128-bit wide memory interface and accelerator architecture that enables the CPU to execute sequential instructions from flash memory at the maximum 72 MHz system clock rate. This feature is available only on the LPC2000 ARM microcontroller family of products. The LPC2468 can execute both 32-bit ARM and 16-bit Thumb instructions. Support for the two instruction sets means engineers can choose to optimize their application for either performance or code size at the sub-routine level. When the core executes instructions in Thumb state it can reduce code size by more than 30 % with only a small loss in performance while executing instructions in ARM state maximizes core performance.

The LPC2468 microcontroller is ideal for multi-purpose communication applications. It incorporates a 10/100 Ethernet Media Access Controller (MAC), a USB full-speed Device/Host/OTG Controller with 4 kB of endpoint RAM, four UARTs, two Controller Area Network (CAN) channels, an SPI interface, two Synchronous Serial Ports (SSP), three I²C interfaces, and an I²S interface. Supporting this collection of serial communications interfaces are the following feature components; an on-chip 4 MHz internal precision oscillator, 98 kB of total RAM consisting of 64 kB of local SRAM, 16 kB SRAM for Ethernet, 16 kB SRAM for general purpose DMA, 2 kB of battery powered SRAM, and an External Memory Controller (EMC). These features make this device optimally suited for communication gateways and protocol converters. Complementing the many serial communication controllers, versatile clocking capabilities, and memory features are various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, two PWM units, four external interrupt pins, and up to 160 fast GPIO lines. The LPC2468 connects 64 of the GPIO pins to the hardware based Vector Interrupt Controller (VIC) that means these external inputs can generate edge-triggered interrupts. All of these features make the LPC2468 particularly suitable for industrial control and medical systems.

LPC2468FET208: Product Block Diagram

sot950-1_3d

Data Sheets (1)

Errata (1)

Application Notes (14)

Users Guides (1)

Brochures (3)

Package Information (1)

Supporting Information (2)

Design Support

• 此文档描述了几个演示LPC SWIM图形库的示例项目 (REV 1.0) ZIP AN10815_-_SC_1 2/6/2012

Snippets, Boot Code, Headers, Monitors, etc.

• Sample Code Bundle for LPC23xx/LPC24xx Peripherals using Keil's μVision (REV 1) ZIP LPC23XX-24XX-SAMP-SW 7/29/2016

Software

• LPC2000_Series_Secondary_Bootl_1 (REV 1.3) ZIP LPC2000_SERIES_SECONDARY_BOOTL_1 9/5/2012
• Porting uIP1.0 to LPC23xx/24xx (REV 1.2) ZIP UIP_WEBSERVER_SRC_1 9/4/2012
• AN10674 - CAN driver with FullCAN mode (REV 1.0) ZIP AN10674 5/10/2012
• AN10771_SDRAM_1 (REV 0.1) ZIP AN10771_SDRAM_1 11/26/2008
• AN10722 - RC5 decoder using the LPC2000 (REV 1.0) ZIP AN10722 7/17/2008

Ordering Information

Package Information

Product ID	Package Description	Outline Version	Reflow/Wave Soldering	Packing	Product Status	Part NumberOrdering code(12NC)	Marking	Chemical Content	RoHS / Pb Free / RHF	LeadFree Conversion Date	EFR	IFR(FIT)	MTBF(hour)	MSL	MSL LF
LPC2468FET208		SOT950-1		Tray, Bakeable, Single in Drypack	Active	LPC2468FET208,551 (9352 832 34551)	Standard Marking	LPC2468FET208		Always Pb-free	0.0	2.84	2.58E8	NA	2