MC13852: General Purpose Low-Noise Amplifier with Bypass Switch

The MC13852 is intended for applications from 400 to 1000 MHz and the MC13851 is for applications >1000 MHz
Gain: 20.3 dB (typ) at 434 MHz and 18.7 dB (typ) at 900 MHz
Output third order intercept point (OIP3): 10.6 dBm at 434 MHz and 14.2 dBm (typ) dBm at 900 MHz
Noise figure (NF): 1.65 dB (typ) at 434 MHz and 1.2 dB at 900 MHz
Output 1 dB compression point (P1dB): 7.8 dBm (typ) at 434 MHz and 9.6 dBm (typ) at 900 MHz
Our IP3 Boost Circuitry
Bypass mode has return losses comparable to active mode, for use in systems with filters and duplexers
Bypass mode improves dynamic range in variable signal strength environments
Integrated logic-controlled standby mode with current drain < 1 µA
Total supply current variable from 3 to 6 mA using an external bias resistor.
In a receiver system with 20% active mode and 80% bypass mode, the average current drain is < 0.6 mA
On-chip bias sets the bias point
Bias stabilized for device and temperature variations
MLPD-8 leadless package with low parasitics
434 and 900 MHz application circuit evaluation boards with characterization data are available
Available in tape and reel packaging

Name/Description	Modified Date
MC13852 General Purpose Low Noise Amplifier (REV 2.0) PDF (2.6 MB) MC13852	02 Dec 2010

Name/Description	Modified Date
Low Noise Amplifiers Fact Sheet (REV 4) PDF (173.7 kB) RFLNAFS	30 Dec 2014

Name/Description	Modified Date
MC13852 Evaluation Board Quick Start - 434 MHz (REV 0) PDF (152.0 kB) MC13852434QSG	30 Nov 2010
MC13852 Evaluation Board Quick Start - 900 MHz (REV 0) PDF (151.5 kB) MC13852900QSG	30 Nov 2010

Name/Description	Modified Date
Practical Considerations for Low Noise Amplifier Design - White Paper (REV 0) PDF (318.8 kB) RFLNAWP	24 May 2013

Product	Status	Frequency Min (Min) (MHz)	Frequency Max (Max) (MHz)	Die Technology	Application	LNA Band Cellular Application	Modes	Gain (Typ) (dB) @ f (MHz)	Noise Figure (Typ) (dB) @ f (MHz)	Input 3rd Order Intercept (Typ) (dBm) @ f (MHz)	Input P1dB (Typ) (dBm) @ (MHz)	Output Intercept Point (Typ) (dBm) @ f (MHz)	Supply Current (Typ) (mA)	Standby Current (Typ) (uA)	Supply Voltage (Typ) (V)	Supply Voltage (Min-Max) (V)	Bypass Gain (dBm) @ f (MHz)	Bypass Input 3rd Ord Intercept (Typ) (dBm) @ f (MHz)	Biasing
MC13852-434EVK	Active
MC13852-900EVK	Active
MC13852EPR2	End of Life	400	1000	eSiGe BiCMOS	900 MHz ISM, CDMA, Cellular, LNAs, PCS, Smart Metering, RKE, UHF	900	Active, Bypass, Standby	19.3 @ 434, 18.2 @ 900	1.6 @ 434, 1.18 @ 900	-11.6 @ 434, -5.1 @ 900	-13.3 @ 434, -8.4 @ 900	7.9 @ 434, 13.1 @ 900	4.4	4	2.75	2.3 to 3	-8.3 @ 434, -5.7 @ 900	24.9 @ 434, 26.7 @ 900	External Rbias

Package Description	Outline Version	Packing	Product Status	Part Number	Chemical Content	MSL	PPT (°C)
HARDWARE ONLY		MPQ - 1 EACHPOQ - 1 EACH	Active	MC13852-900EVK	MC13852-900EVK.pdf
HARDWARE ONLY		MPQ - 1 EACHPOQ - 1 EACH	Active	MC13852-434EVK	MC13852-434EVK.pdf
DFN-EP 8 220.6 P0.5	98ASA00223D	MPQ - 3000 REELPOQ - 3000 BOX	End of Life	MC13852EPR2	MC13852EPR2.pdf	3	260