NX3V1T384: Low-ohmic single-pole single-throw analog switch
The NX3V1T384 is a low-ohmic single-pole single-throw analog switch. It has two
input/output terminals (Y and Z) and an active LOW enable input pin (E). When E is HIGH,
the analog switch is turned off.
Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise
and fall times. A low input voltage threshold allows pin E to be driven by lower level logic
signals without a significant increase in supply current ICC. This makes it possible for the
NX3V1T384 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for
logic level translation.
The NX3V1T384 allows signals with amplitude up to VCC to be transmitted from Y to Z or
from Z to Y. Its ultra-low ON resistance (0.3 Ω) and flatness (0.1 Ω) ensures minimal
attenuation and distortion of transmitted signals.
Outline 3d SOT353
![Outline 3d SOT353](/image/nxp/sot353_3d.gif)
Data Sheets (1)
Brochures (1)
Package Information (1)
Packing (1)
Supporting Information (3)
IBIS Model
Ordering Information
Product | Status | Description | Package version | Power dissipation considerations | RON (Ohm) | Function | Family | Xtalk (dB) | VCC (V) | Tamb (Cel) | RON(FLAT) (Ohm) | Configuration | Package name | Logic switching levels | f(-3dB) (MHz) | Ψth(j-top) (K/W) | Rth(j-a) (K/W) | THD (%) |
---|
NX3V1T384GW | Introduction Pending | Analog switches | SOT353 | ultra low | 0.45 | single-pole, single-throw analog switch with low threshold inputs | NX3 | -90 | 1.4 - 4.3 | -40~125 | 0.2 | SPST-NC | TSSOP5 | CMOS/LVTTL | 25 | 69.0 | 250 | 0.01 |
Package Information