PX1011B: PCI Express stand-alone X1 PHY

The PX1011B is a high-performance, low-power, single-lane PCI Express electrical PHYsical layer (PHY) that handles the low level PCI Express protocol and signaling. The PX1011B PCI Express PHY is compliant to the PCI Express Base Specification, Rev. 1.0a, and Rev. 1.1. The PX1011B includes features such as Clock and Data Recovery (CDR), data serialization and de-serialization, 8b/10b encoding, analog buffers, elastic buffer and receiver detection, and provides superior performance to the Media Access Control (MAC) layer devices.

The PX1011B is a 2.5 Gbit/s PCI Express PHY with 8-bit data PXPIPE interface. Its PXPIPE interface is a superset of the PHY Interface for the PCI Express (PIPE) specification, enhanced and adapted for off-chip applications with the introduction of a source synchronous clock for transmit and receive data. The 8-bit data interface operates at 250 MHz with SSTL_2 signaling. The SSTL_2 signaling is compatible with the I/O interfaces available in FPGA products.

The PX1011B PCI Express PHY supports advanced power management functions. The PX1011BI is for the industrial temperature range (-40 ℃ to +85 ℃). Automotive AEC-Q100 compliant version PX1011B-EL1/Q900 is available.

PX1011B: Product Block Diagram
sot643-1_3d
2.1 PCI Express interface
  • Compliant to PCI Express Base Specification 1.1
  • Single PCI Express 2.5 Gbit/s lane
  • Data and clock recovery from serial stream
  • Serializer and De-serializer (SerDes)
  • Receiver detection
  • 8b/10b coding and decoding, elastic buffer and word alignment
  • Supports loopback
  • Supports direct disparity control for use in transmitting compliance pattern
  • Supports lane polarity inversion
  • Low jitter and Bit Error Rate (BER)
2.2 PHY/MAC interface
  • Based on Intel PHY Interface for PCI Express architecture v1.0 (PIPE)
  • Adapted for off-chip with additional synchronous clock signals (PXPIPE)
  • 8-bit parallel data interface for transmit and receive at 250 MHz
  • 2.5 V SSTL_2 class I signaling
2.3 JTAG interface
  • JTAG (IEEE 1149.1) boundary scan interface
  • Built-In Self Test (BIST) controller tests SerDes and I/O blocks at speed
  • 3.3 V CMOS signaling
2.4 Power management
  • Dissipates < 300 mW in L0 normal mode
  • Support power management of L0, L0s and L1
2.5 Clock
  • 100 MHz external reference clock with ±300 ppm tolerance
  • Supports spread spectrum clock to reduce EMI
  • On-chip reference clock termination
2.6 Miscellaneous
  • LFBGA81 leaded or lead-free packages
  • Operating ambient temperature Commercial: 0 ℃ to +70 ℃ Industrial: -40 ℃ to +85 ℃
  • ESD protection voltage for Human Body Model (HBM): 2000 V
Data Sheets (1)
Name/DescriptionModified Date
PCI Express stand-alone X1 PHY (REV 6.0) PDF (329.0 kB) PX1011B27 Jun 2011
Package Information (1)
Name/DescriptionModified Date
plastic low profile fine-pitch ball grid array package; 81 balls; body 9 x 9 x 1.05 mm (REV 1.0) PDF (396.0 kB) SOT643-108 Feb 2016
Packing (1)
Name/DescriptionModified Date
LFBGA81; Reel dry pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending ,518 or... (REV 1.0) PDF (190.0 kB) SOT643-1_51822 Feb 2016
Ordering Information
ProductPackage version
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
PX1011B-EL1/GSOT643-1Tray, Bakeable, Multiple in DrypackActivePX1011B-EL1/G,557 (9352 821 13557)PX1011B-EL1/GPX1011B-EL1/GAlways Pb-free0.010.01E8NA3
Tray, Bakeable, Single in DrypackActivePX1011B-EL1/G,551 (9352 821 13551)PX1011B-EL1/GPX1011B-EL1/GAlways Pb-free0.010.01E8NA3
PX1011B-EL1/Q900SOT643-1Tray, Bakeable, Single in DrypackActivePX1011B-EL1/Q900,5 (9352 945 73551)PX1011B-EL1/QPX1011B-EL1/Q900Always Pb-free0.010.01E8NA3
Reel 13" Q1/T1 in DrypackActivePX1011B-EL1/Q9005 (9352 945 73518)PX1011B-EL1/QPX1011B-EL1/Q900Always Pb-free0.010.01E8NA3
PX1011BI-EL1/GSOT643-1Reel 13" Q1/T1 in DrypackActivePX1011BI-EL1/G,518 (9352 821 14518)PX1011BI-EL1/GPX1011BI-EL1/GAlways Pb-free0.010.01E8NA3
Tray, Bakeable, Multiple in DrypackActivePX1011BI-EL1/G,557 (9352 821 14557)PX1011BI-EL1/GPX1011BI-EL1/GAlways Pb-free0.010.01E8NA3
Tray, Bakeable, Single in DrypackActivePX1011BI-EL1/G,551 (9352 821 14551)PX1011BI-EL1/GPX1011BI-EL1/GAlways Pb-free0.010.01E8NA3
PCI Express stand-alone X1 PHY PX1011B
plastic low profile fine-pitch ball grid array package; 81 balls; body 9 x 9 x 1.05 mm PX1011B
LFBGA81; Reel dry pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending ,518 or... PX1011B
PX1011B
PX1011B