TDA1566: I2C-bus controlled dual channel 46 W/2 Ohm, single channel 92 W/1 Ohm amplifier with load diagnostic features

The TDA1566 is a car audio power amplifier with a complementary output stage realized in BCDMOS. The TDA1566 has two Bridge Tied Load (BTL) output stages and comes in a HSOP24 or DBS27P package.

The TDA1566 can be controlled with or without I²C-bus. With I²C-bus control gain settings per channel and diagnostic trigger levels can be selected. Failure conditions as well as load identification can be read with I²C-bus. The load identification detects whether the outputs of a BTL channel are connected with a DC or AC load and discriminates between a speaker load, a line driver load and an open (unconnected) load.

The TDA1566 can be configured in a single BTL mode and drive a 1 Ω load. For the single BTL mode it is necessary to connect on the Printed-Circuit Board (PCB) the outputs of both BTL channels in parallel.

sot566-3_3d
Data Sheets (1)
Name/DescriptionModified Date
I2C-bus controlled dual channel 46 W/2 Ohm, single channel 92 W/1 Ohm amplifier with load diagnostic features (REV 2.0) PDF (289.0 kB) TDA156620 Aug 2007
Package Information (1)
Name/DescriptionModified Date
plastic, heatsink small outline package; 24 leads; low stand-off height (REV 1.0) PDF (328.0 kB) SOT566-308 Feb 2016
Ordering Information
ProductPackage versionGain (dB)Amplifier typeOutput Impedance (Ohm)THD %Output power (W)Package name
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFMSLMSL LF
TDA1566TH/N2SSOT566-3Reel 13" Q1/T1ActiveTDA1566TH/N2S,118 (9352 908 82118)Standard MarkingTDA1566TH/N2S11
Bulk PackActiveTDA1566TH/N2S,112 (9352 908 82112)Standard MarkingTDA1566TH/N2S11
I2C-bus controlled dual channel 46 W/2 Ohm, single channel 92 W/1 Ohm amplifier with load diagnostic features TDA1566
plastic, heatsink small outline package; 24 leads; low stand-off height TDF8591TH
TDF8591TH