TDA18264HB: Cable Full Spectrum Transceiver
TDA18264 is a Full Spectrum Transceiver (FST). This device includes all the key functions to realize the front end of a multiple stream receiver and transmitter for a cable gateway.
The receive function of TDA18264 allows the parallel reception of up to 16 independent cable channels, each of them being at any frequency in the RF band from 42 MHz to 1002 MHz. Each channel can be 6 MHz or 8 MHz wide QAM modulated, according to ITU J/83 annex A, B or C. TDA18264 input is connected to the cable through a cable spectrum pre-processor as TDA18204 that amplifies and corrects the tilt of the cable spectrum. The output of the TDA18264 is connected to the main SoC using one or two high-speed serial links.
The transmit function of TDA18264 allows generating the return channel of a DOCSIS 3.0 cable modem, based on the signal coming from the main SoC through a high-speed serial link. Output of this section only requires a power amplifier as BGA3031 to drive the cable through a diplexer with the required power level.
TDA18264 realizes the complete 16-channel receive path and 8-channel transmit path using only 2.55 W.
The proprietary highly digitalized architecture enables accurate spectral analysis (from 50 MHz to 1350 MHz RF band) which can be useful for providing remote diagnostic tools to cable operators.
sot1317-1_3d
Package Information (1)
| Name/Description | Modified Date |
|---|---|
| plastic thermal enhanced thin quad flat package; no leads; 80 terminals; resin based; body 12 x 12 x 1.1 mm (REV 1.0) PDF (150.0 kB) SOT1317-1 | 08 Feb 2016 |
Ordering Information
| Product | Status | Package version | Supply voltage (V) | CSO / CTB [Typ] (dB/dB) | Package name | Noise figure [Typ] (dB) | Return loss [Typ] (input (dB) | Cable type | Terrestrial type | Total power consumption [Typ] (mW) | PAL, SECAM, NTSC | DVB-T | DVB-T2 | DVB-C | DVB-C2 | DVB-H | ATSC | ISDB-T / DTMB | Frequency range (MHz) | Phase noise @ 10KHz [Typ] (dBc/Hz) | Phase noise @ 1KHz [Typ] (dBc/Hz) | 1 dB input compression point [min] (dBµV) | RSSI Accuracy Abs. [Typ] (dB) | RSSI Accuracy Rel. [Typ] (dB) | Dual tuner | Number of channels in application | Zero Power Loop-Through (ZPLT) | Loop-Through (LT) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TDA18264HB/C1 | Active | SOT1317-1 | HTQFN80R |
Package Information
| Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | MSL | MSL LF |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TDA18264HB/C1 | | SOT1317-1 | Reel 13" Q1/T1 in Drypack | Active | TDA18264HB/C1Y (9352 991 26518) | Standard Marking | TDA18264HB/C1 |    | Always Pb-free | 3 | 3 | |
| Tray, Bakeable, Multiple in Drypack | Active | TDA18264HB/C1,557 (9352 991 26557) | Standard Marking | TDA18264HB/C1 | | Always Pb-free | 3 | 3 | ||||
| Tray, Bakeable, Single in Drypack | Active | TDA18264HB/C1E (9352 991 26551) | Standard Marking | TDA18264HB/C1 | | Always Pb-free | 3 | 3 |
