The TJA1082 FlexRay node transceiver is compliant with the FlexRay electrical physical layer specification V2.1 Rev. B. In addition, it incorporates features and parameters included in V3.0.1. It is primarily intended for communication systems operating at between 2.5 Mbit/s and 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network. The TJA1082 offers an optimized solution for Electronic Control Unit (ECU) applications that do not need enhanced power management and are typically switched by the ignition or activated by a dedicated wake-up line.
The TJA1082 provides a differential transmit capability to the network and a differential receive capability to the FlexRay controller. It offers excellent ElectroMagnetic Compatibility (EMC) performance as well as high ElectroStatic Discharge (ESD) protection.
The TJA1082 actively monitors system performance using dedicated error and status information (readable by any microcontroller), as well as internal voltage and temperature monitoring.
Name/Description | Modified Date |
---|---|
FlexRay node transceiver (REV 6.0) PDF (275.0 kB) TJA1082 | 25 Feb 2016 |
Name/Description | Modified Date |
---|---|
AN10854_1 Application Hints Rev1.1 TJA1082 (REV 1.1) DOC (290.0 kB) AN10854_1_APPLICATIONHINTS_REV | 03 Nov 2010 |
Name/Description | Modified Date |
---|---|
Your Partner for FlexRay (REV 1.0) PDF (391 B) 75017415 | 30 Apr 2013 |
Name/Description | Modified Date |
---|---|
plastic thin shrink small outline package; 14 leads; body width 4.4 mm (REV 1.0) PDF (285.0 kB) SOT402-1 | 08 Feb 2016 |
Name/Description | Modified Date |
---|---|
TSSOP14; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... (REV 1.0) PDF (217.0 kB) SOT402-1_118 | 08 Apr 2013 |
Name/Description | Modified Date |
---|---|
Footprint for wave soldering (REV 1.0) PDF (16.0 kB) SSOP-TSSOP-VSO-WAVE | 08 Oct 2009 |
Product | Status | Product category | Category | Supported standards | Package name | Low power modes | Package version | Supply voltage [min] (V) | Supply voltage [max] (V) | Data rate [min] (kb/s) | Data rate [max] (kb/s) | FlexRay Channels | Voltage on bus pins [min] (V) | CAN channels | Voltage on bus pins [max] (V) | LIN channels | VESD IEC61000-4-2 (kV) | VESD HBM on bus pins (+/- kV) | VIO option available | Application | Recommended Version | Tvj [max] (°C) | Rth(j-a) (K/W) | Under-voltage detection | Over-temperature detection | INH / Wake Pin | Min High Input Levels (V) | No of pins |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TJA1082TT | Active | FlexRay Transceiver | FlexRay | FlexRay EPL v2.1 Rev B | TSSOP14 | Standby Mode | SOT402-1 | 4.5 | 5.25 | 2500 | 10000 | 1 | -60 | 0 | 60 | 0 | 8 | 8 | Yes | Automotive | TJA1082TT | -40~150 | 130 | Yes | Yes | No | 0.7 x Vio | 14 |
Product ID | Package Description | Outline Version | Reflow/Wave Soldering | Packing | Product Status | Part NumberOrdering code(12NC) | Marking | Chemical Content | RoHS / Pb Free / RHF | LeadFree Conversion Date | MSL | MSL LF |
---|---|---|---|---|---|---|---|---|---|---|---|---|
TJA1082TT | SOT402-1 | SSOP-TSSOP-VSO-WAVE | Reel 13" Q1/T1 | Active | TJA1082TT,118 (9352 880 81118) | Standard Marking | TJA1082TT | Always Pb-free | 1 | 1 | ||
Bulk Pack | Active | TJA1082TT,112 (9352 880 81112) | Standard Marking | TJA1082TT | Always Pb-free | 1 | 1 |