HTRC11001T: HITAG® reader solution

The HITAG® Reader Chip HTRC110 is intended for use with transponders, which are based on NXP® Semiconductors based HITAG transponder ICs.

In addition the IC supports other 125 kHz transponder types using amplitude modulation for the write operation and AM/PM for the read operation. The receiver parameters (gain factors, filter cutoff frequencies) can be optimized to system and transponder requirements. The HTRC110 is designed for easy integration into RF-identification readers. State-of-the-art technology allows almost complete integration of the necessary building blocks. A powerful antenna driver/modulator together with a low-noise adaptive sampling time demodulator, programmable filters/amplifier and digitizer build the complete transceiver unit, required to design high-performance readers. A three-pin microcontroller interface is employed for programming the HTRC110 as well as for the bidirectional communication with the transponders. The three-wire interface can be changed into a two-wire interface by connecting the data input and the data output.

Tolerance dependent zero amplitude modulation caused severe problems in envelope detector systems, resulting in the need of very low tolerance reader antennas. These problems are solved by the Adaptive Sampling Time technique (AST).

HTRC11001T: Product Block Diagram
sot108-1_3d
Data Sheets (1)
Name/DescriptionModified Date
HITAG® reader solution (REV 0.1) PDF (183.0 kB) 03703131 Mar 2010
Application Notes (1)
Name/DescriptionModified Date
Read/write devices based on the HITAG® read/write IC HTRC110 (REV 3.0) PDF (523.0 kB) AN9808008 Apr 2010
Brochures (1)
Name/DescriptionModified Date
RFID for brand protection - secure your most valuable assets & increase customer engagement (REV 1.0) PDF (4.7 MB) 7501759517 Dec 2014
Package Information (1)
Name/DescriptionModified Date
plastic small outline package; 14 leads; body width 3.9 mm (REV 1.0) PDF (166.0 kB) SOT108-108 Feb 2016
Packing (1)
Name/DescriptionModified Date
SO14; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... (REV 4.0) PDF (207.0 kB) SOT108-1_11808 Apr 2013
Supporting Information (2)
Name/DescriptionModified Date
Footprint for reflow soldering (REV 1.0) PDF (9.0 kB) SO-SOJ-REFLOW08 Oct 2009
Footprint for wave soldering (REV 1.0) PDF (8.0 kB) SO-SOJ-WAVE08 Oct 2009
Software
Ordering Information
ProductStatusStatusBudgetary Price excluding tax(US$)Package Type and Termination CountGPIOsQualification Tier
HTRC11001T/02EEActive
HTRC11001T/03EEActive
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateMSLMSL LF
HTRC11001T/02EESOT108-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Bulk PackActiveHTRC11001T/02EE,11 (9352 600 91112)Standard MarkingHTRC11001T/02EEweek 25, 200411
HTRC11001T/03EESOT108-1SO-SOJ-REFLOW SO-SOJ-WAVE
SO-SOJ-REFLOW SO-SOJ-WAVE
Reel 13" Q1/T1ActiveHTRC11001T/03EE,11 (9352 600 92118)Standard MarkingHTRC11001T/03EEweek 25, 200411
HITAG® reader solution htrc11001t
Read/write devices based on the HITAG® read/write IC HTRC110 htrc11001t
RFID for brand protection - secure your most valuable assets & increase customer engagement htrc11001t
Control library HTRC110 HTRC11001T
plastic small outline package; 14 leads; body width 3.9 mm 74LV164_Q100
Footprint for reflow soldering NPIC6C596A_Q100
Footprint for wave soldering NPIC6C596A_Q100
SO14; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or J Ordering... 74LV164_Q100
HTRC11001T
UBA2213