NPIC6C4894-Q100: Power logic 12-bit shift register; open-drain outputs
The NPIC6C4894-Q100 is a 12-stage serial shift register. It has a storage latch associated
with each stage for strobing data from the serial input (D) to the parallel open-drain
outputs (QP0 to QP11). Data is shifted on positive-going clock (CP) transitions. The data
in each shift register stage is transferred to the storage register when the latch enable (LE)
input is HIGH. Data in the storage register drives the gate of the output extended-drain
NMOS transistor whenever the output enable input (OE) is HIGH. A LOW on OE causes
the outputs to assume a high-impedance OFF-state. Operation of the OE input does not
affect the state of the registers. Two serial outputs (QS1 and QS2) are available for
cascading a number of NIC6C4894-Q100 devices. Serial data is available at QS1 on
positive-going clock edges to allow high-speed operation in cascaded systems with a fast
clock rise time. The same serial data is available at QS2 on the next negative going clock
edge. It is used for cascading NPIC6C4894-Q100 devices when the clock has a slow rise
time. The open-drain outputs are 33 V/100 mA continuous current extended-drain NMOS
transistors designed for use in systems that require moderate load power such as LEDs.
Integrated voltage clamps in the outputs, provide protection against inductive transients.
This protection makes the device suitable for power driver applications such as relays,
solenoids and other low-current or medium-voltage loads.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
NPIC6C4894_Q100: Product Block Diagram
SOT163-1
Data Sheets (1)
Brochures (1)
Selector Guides (2)
Package Information (2)
Packing (3)
Supporting Information (3)
Ordering Information
Product | Status |
---|
NPIC6C4894D-Q100 | Active |
NPIC6C4894PW-Q100 | Active |
Package Information