NX3L1T66GW: Low-ohmic single-pole single-throw analog switch
The NX3L1T66 provides one single-pole single-throw analog switch function. It has two input/output terminals (Yand Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.
Schmitt-trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V.
A low input voltage threshold allows pin E to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3L1T66 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation.
The NX3L1T66 allows signals with amplitude up to VCC to be transmitted from nY to nZ; or from nZ to nY. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.
NX3L1T66GW: Product Block Diagram
Outline 3d SOT353
Data Sheets (1)
Brochures (1)
Package Information (1)
Packing (1)
Supporting Information (3)
IBIS Model
Ordering Information
| Product | Status | Family | Configuration | Function | VCC (V) | Description | Package version | Logic switching levels | RON (Ohm) | RON(FLAT) (Ohm) | f(-3dB) (MHz) | THD (%) | Xtalk (dB) | Power dissipation considerations | Tamb (Cel) | Rth(j-a) (K/W) | Ψth(j-top) (K/W) | Rth(j-c) (K/W) | Package name | No of pins |
|---|
| NX3L1T66GW | End of Life | | SPST-NO | | 1.4 - 4.3 | | | CMOS/LVTTL | 0.75 | 0.3 | 60 | 0.0024 | -90 | ultra low | -40~125 | 250 | 69.0 | | TSSOP5 | |
