PCA9703PW: 18 V tolerant SPI 16-bit GPI with maskable INT

The PCA9703 is a low power 18 V tolerant SPI General Purpose Input (GPI) shift register designed to monitor the status of switch inputs. It generates an interrupt when one or more of the switch inputs change state but allows selected inputs to not generate interrupts using the interrupt masking feature. The input level is recognized as a HIGH when it is greater than 0.8 × VDD and as a LOW when it is less than 0.55 × VDD (minimum LOW threshold of 2.5 V at 5 V node). The PCA9703 can monitor up to 16 switch inputs.

The falling edge of the CS pin samples the input port status and clears the interrupt. When CS is LOW, the rising edge of the SCLK loads the shift register and shifts the value out of the shift register. The serial input is sampled on the falling edge of SCLK. The contents of the shift register are loaded into the interrupt mask register of the device on the rising edge of CS.

Each of the input ports has a 18 V breakdown ESD protection circuit, which dumps the ESD/overvoltage current to ground. When used with a series resistor (minimum 100 kΩ), the input can connect to a 12 V battery and support double battery, reverse battery, 27 V jump start and 40 V load dump conditions in automotive applications. Higher voltages can be tolerated on the inputs depending on the series resistor used to limit the input current.

The INT_EN pin is used to both enable the GPI pins and to enable the INT output pin to minimize battery drain in cyclically supplied pull-up or pull-down applications. The SDIN pull-down prevents floating nodes when the device is used in daisy-chain applications.

With both the high breakdown voltage and high ESD, this device is useful for both automotive (AEC-Q100 compliance available) and mobile applications.

Outline 3d SOT355-1
Data Sheets (1)
Name/DescriptionModified Date
18 V tolerant SPI 16-bit GPI with maskable INT (REV 4.0) PDF (297.0 kB) PCA970305 Sep 2014
Users Guides (3)
Name/DescriptionModified Date
I2C-bus specification and user manual (REV 6.0) PDF (1.4 MB) UM1020428 Apr 2014
I2C-bus specification and user manual (REV 5.0) PDF (1.6 MB) UM10204_JA03 Apr 2013
I2C Demonstration Board 2005-1 Quick Start Guide (REV 1.0) PDF (261.0 kB) UM1020613 Jun 2006
Brochures (1)
Name/DescriptionModified Date
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns (REV 1.0) PDF (3.5 MB) 7501754001 Aug 2014
Package Information (1)
Name/DescriptionModified Date
plastic thin shrink small outline package; 24 leads; body width 4.4 mm (REV 1.0) PDF (353.0 kB) SOT355-108 Feb 2016
Packing (1)
Name/DescriptionModified Date
TSSOP24; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... (REV 4.1) PDF (227.0 kB) SOT355-1_11815 Apr 2013
Supporting Information (1)
Name/DescriptionModified Date
Footprint for wave soldering (REV 1.0) PDF (16.0 kB) SSOP-TSSOP-VSO-WAVE08 Oct 2009
Ordering Information
ProductStatusReset input pinPackage namePackage versionOperating Temperature (Cel)
PCA9703PW/Q900Active
PCA9703PWActivenoTSSOP24SOT355-1-40~125
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
PCA9703PWSOT355-1SSOP-TSSOP-VSO-WAVEReel 13" Q1/T1ActivePCA9703PW,118 (9352 890 45118)PCA9703PWPCA9703PWAlways Pb-free0.02.05E811
Bulk PackActivePCA9703PW,112 (9352 890 45112)PCA9703PWPCA9703PWAlways Pb-free0.02.05E811
PCA9703PW/Q900SOT355-1SSOP-TSSOP-VSO-WAVEReel 13" Q1/T1ActivePCA9703PW/Q900,118 (9352 890 63118)PCA9703PWPCA9703PW/Q900Always Pb-free0.02.05E811
18 V tolerant SPI 16-bit GPI with maskable INT pca9703
I2C-bus specification and user manual pca9685pw
I2C-bus specification and user manual pca9685pw
I2C Demonstration Board 2005-1 Quick Start Guide pca9685pw
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns pca9685pw
plastic thin shrink small outline package; 24 leads; body width 4.4 mm 74LVC4245A_Q100
SSOP-TSSOP-VSO-WAVE LPC1114FDH28
TSSOP24; Reel pack; SMD, 13" Q1/T1 Standard product orientation Orderable part number ending ,118 or... 74LVC4245A_Q100
SA639DH