• 简体中文
• English

PTN3381DBS: Enhanced performance HDMI/DVI level shifter

The PTN3381D is a high-speed level shifter device which converts four lanes of low-swing AC-coupled differential input signals to DVI v1.0 and HDMI v1.4b compliant open-drain current-steering differential output signals, up to 3 Gbit/s to support 36-bit deep color, 3D and 3 Gbit/s modes. Each of these channels provides a level-shifting differential buffer to translate from low-swing AC-coupled differential signaling on the source side, to TMDS-type DC-coupled differential current-mode signaling terminated into 50 Ω to 3.3 V on the sink side. Additionally, the PTN3381D provides a single-ended active buffer for voltage translation of the HPD signal from 5 V on the sink side to 3.3 V on the source side and provides a channel with active buffering and level shifting of the DDC channel (consisting of a clock and a data line) between 3.3 V source-side and 5 V sink-side. The DDC channel is implemented using active I²C-bus buffer technology providing capacitive isolation, redriving and level shifting as well as disablement (isolation between source and sink) of the clock and data lines.

To provide the highest level of integration in external adapter (or: dongle) applications, PTN3381D includes an on-board 5 V DC regulator. Its output is designed to provide the required 5 V power supply to the DVI or HDMI connector, thereby eliminating the need for a separate external regulator. The on-board regulator needs only two external capacitors to operate, and its output is active whenever a valid 3.3 V is applied to the PTN3381D VDD pins.

The low-swing AC-coupled differential input signals to the PTN3381D typically come from a display source with multi-mode I/O, which supports multiple display standards, for example, DisplayPort, HDMI and DVI. While the input differential signals are configured to carry DVI or HDMI coded data, they do not comply with the electrical requirements of the DVI v1.0 or HDMI v1.3a specification. By using PTN3381D, chip set vendors are able to implement such reconfigurable I/Os on multi-mode display source devices, allowing the support of multiple display standards while keeping the number of chip set I/O pins low.

The PTN3381D main high-speed differential lanes feature low-swing self-biasing differential inputs which are compliant to the electrical specifications of DisplayPort Standard v1.2 and/or PCI Express Standard v1.1, and open-drain current-steering differential outputs compliant to DVI v1.0 and HDMI v1.4b electrical specifications.The I²C-bus channel actively buffers as well as level-translates the DDC signals for optimal capacitive isolation. Its I²C-bus control block also provides for optional software HDMI dongle detect by issuing a predetermined code sequence upon a read command to an I²C-bus specified address. The PTN3381D also supports power-saving modes in order to minimize current consumption when no display is active or connected.

The PTN3381D is a fully featured HDMI as well as DVI level shifter. It is functionally equivalent to PTN3361D but provides an onboard 5 V regulator. The PTN3381D supersedes PTN3381B, and provides a better high speed performance with a programmable equalizer.

PTN3381D is powered from a single 3.3 V power supply consuming a small amount of power (230 mW typical with no load at 5 V regulator) and is offered in a 48-terminal HVQFN48 package.

sot619-1_3d

• Integrated DDC buffering and level shifting (3.3 V source to 5 V sink side)
• Rise time accelerator on sink-side DDC ports
• 100 kHz I²C-bus clock frequency
• Back-power safe sink-side terminals to disallow backdrive current when power is off or when DDC is not enabled

• Incorporates I²C slave ROM
• Responds to DDC read to address 81h with predetermined byte sequence
• Feature enabled by pin DDET (must be enabled for correct operation in accordance with DisplayPort interoperability guideline)

• HPD non-inverting level shift from 0 V on the sink side to 0 V on the source side, or from 5 V on the sink side to 3.3 V on the source side
• Integrated 200 kΩ pull-down resistor on HPD sink input guarantees ‘input LOW’ when no display is plugged in
• Back-power safe design on HPD_SINK to disallow backdrive current when power is off

• Generates 5 V for the DVI/HDMI connector from the 3.3 V DP_PWR pin supplied by the DisplayPort connector
• Supports up to 75 mA of load current with an accuracy of ±300 mV
• Only two external capacitors required
• Eliminates need for an external 5 V regulator in dongle applications
• Back drive protection on 5 V output
• Short-circuit protection
• Overcurrent protection

• Power supply 2.85 V to 3.6 V
• ESD resilience to 6 kV HBM, 1 kV CDM
• Power-saving modes (using output enable)
• Back-current-safe design on all sink-side main link, DDC and HPD terminals
• Transparent operation: no re-timing or software configuration required

Data Sheets (1)

Package Information (1)

Packing (1)

Ordering Information

Package Information

Product ID	Package Description	Outline Version	Reflow/Wave Soldering	Packing	Product Status	Part NumberOrdering code(12NC)	Marking	Chemical Content	RoHS / Pb Free / RHF	LeadFree Conversion Date	EFR	IFR(FIT)	MTBF(hour)	MSL	MSL LF
PTN3381DBS		SOT619-1		Reel 13" Q1/T1 in Drypack	Active	PTN3381DBS,518 (9352 940 58518)	Standard Marking	PTN3381DBS		Always Pb-free	0.0	4.0	2.5E8	3	3