SE97BTP: DDR memory module temp sensor with integrated SPD

Meets JEDEC Specification 42.4 TSE2002B1, 3 Jun 2009. The NXP® Semiconductors SE97B measures temperature from -40 °C to +125 °C with JEDEC Grade B ±1 °C maximum accuracy between +75 °C and +95 °C critical zone and also provide 256 bytes of EEPROM memory communicating via the I2C-bus/SMBus. It is typically mounted on a DDR3 Dual In-Line Memory Module (DIMM) measuring the DRAM temperature in accordance with the new JEDEC (JC-42.4) Mobile Platform Memory Module Temperature Sensor Component specification and also replacing the Serial Presence Detect (SPD) which is used to store memory module and vendor information.

The SE97B thermal sensor and EEPROM operates over the VDD range of 3.0 V to 3.6 V.

The TS consists of a Δ∑ Analog to Digital Converter (ADC) that monitors and updates its own temperature readings 10 times per second, converts the reading to a digital data, and latches them into the data temperature register. User-programmable registers, the specification of upper/lower alarm and critical temperature trip points, EVENT output control, and temperature shutdown, provide flexibility for DIMM temperature-sensing applications.

When the temperature changes beyond the specified boundary limits, the SE97B outputs an EVENT signal using an open-drain output that can be pulled up between 0.9 V and 3.6 V. The user has the option of setting the EVENT output signal polarity as either an active LOW or active HIGH comparator output for thermostat operation, or as a temperature event interrupt output for microprocessor-based systems. The EVENT output can also be configured as only a critical temperature output.

The EEPROM is designed specifically for DRAM DIMMs SPD. The lower 128 bytes (address 00h to 7Fh) can be Permanent Write Protected (PWP) or Reversible Write Protected (RWP) by software. This allows DRAM vendor and product information to be stored and write protected. The upper 128 bytes (address 80h to FFh) are not write protected and can be used for general purpose data storage.

The SE97B has a single die for both the temp sensor and EEPROM for higher reliability and supports the industry-standard 2-wire I2C-bus/SMBus serial interface. The SMBus TIMEOUT function is supported to prevent system lock-ups. Manufacturer and Device ID registers provide the ability to confirm the identity of the device. Three address pins allow up to eight devices to be controlled on a single bus.

The SE98B is available as the SE97B thermal sensor only.

SE97BTP: Product Block Diagram
sot1069-2_3d
2.1 General features
  • JEDEC (JC-42.4) DIMM temperature sensor plus 256-byte serial EEPROM for Serial Presence Detect (SPD)
  • SDA open-drain output design for best operation in distributed multi-point applications
  • Shutdown current: 0.1 µA (typ.) and 5.0 µA (max.)
  • Power-on reset: 1.8 V (typ.)
  • 2-wire interface: I2C-bus/SMBus compatible, 0 Hz to 400 kHz
  • SMBus Alert Response Address and TIMEOUT 25 ms to 35 ms (programmable)
  • ESD protection exceeds 2500 V HBM per JESD22-A114, 250 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
  • Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
  • Available in HWSON8 package
2.2 Temperature sensor features
  • 11-bit ADC Temperature-to-Digital converter with 0.125 °C resolution
  • Voltage range: 3.0 V to 3.6 V
  • Operating current: 250 µA (typ.) and 400 µA (max.)
  • Programmable hysteresis threshold: off, 0 °C, 1.5 °C, 3 °C, 6 °C
  • Over/under/critical temperature EVENT output
  • B-grade accuracy: ±0.5 °C/±1 °C (typ./max.) ? +75 °C to +95 °C ±1.0 °C/±2 °C (typ./max.) ? +40 °C to +125 °C ±2.0 °C/±3 °C (typ./max.) ? -40 °C to +125 °C
2.3 Serial EEPROM features
  • Read and write voltage range: 3.0 V to 3.6 V
  • Operating current: Write → 0.6 mA (typ.) for 3.5 ms (typ.) Read → 100 µA (typ.)
  • Organized as 1 block of 256 bytes (256 × 8)
  • 100,000 write/erase cycles and 10 years of data retention
  • Permanent and Reversible Software Write Protect
  • Software Write Protection for the lower 128 bytes
Data Sheets (1)
Name/DescriptionModified Date
DDR memory module temp sensor with integrated SPD (REV 1.0) PDF (387.0 kB) SE97B27 Jan 2010
Users Guides (3)
Name/DescriptionModified Date
I2C-bus specification and user manual (REV 6.0) PDF (1.4 MB) UM1020428 Apr 2014
I2C-bus specification and user manual (REV 5.0) PDF (1.6 MB) UM10204_JA03 Apr 2013
I2C Demonstration Board 2005-1 Quick Start Guide (REV 1.0) PDF (261.0 kB) UM1020613 Jun 2006
Brochures (1)
Name/DescriptionModified Date
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns (REV 1.0) PDF (3.5 MB) 7501754001 Aug 2014
Package Information (1)
Name/DescriptionModified Date
HWSON8: plastic thermal enhanced very very thin small outline package, no leads; 8 terminals; (REV 1.1) PDF (190.0 kB) SOT1069-210 Jun 2016
Packing (1)
Name/DescriptionModified Date
HWSON8; Reel pack, SMD, 7" Q2/T3 Turned 90 degree product orientation Orderable part number ending ,547 or... (REV 2.0) PDF (191.0 kB) SOT1069-2_54726 Mar 2014
Ordering Information
ProductStatusPackage versionRemarksStandby current (uA)Operating Temperature (Cel)I2C-bus controlledPart typeAccuracy on-chip (±°C)Operating voltage (VDC)Assignable addressesSMBus clock (kHz)Accuracy remote (±°C)
SE97BTPActiveSOT1069-25-20~1253.0~3.61@-75~95?2@40~1253.0~3.68400
Package Information
Product IDPackage DescriptionOutline VersionReflow/Wave SolderingPackingProduct StatusPart NumberOrdering code(12NC)MarkingChemical ContentRoHS / Pb Free / RHFLeadFree Conversion DateEFRIFR(FIT)MTBF(hour)MSLMSL LF
SE97BTPSOT1069-2Reel 7" Q2/T3 in DrypackActiveSE97BTP,547 (9352 902 19547)97BSE97BTPAlways Pb-free0.02.05E833
DDR memory module temp sensor with integrated SPD se97btp
I2C-bus specification and user manual pca9685pw
I2C-bus specification and user manual pca9685pw
I2C Demonstration Board 2005-1 Quick Start Guide pca9685pw
NXP® I2C-bus solutions 2014: Smart, simple solutions for the 12 most common design concerns pca9685pw
HWSON8: plastic thermal enhanced very very thin small outline package, no leads; 8 terminals; PCT2075TP
HWSON8; Reel pack, SMD, 7" Q2/T3 Turned 90 degree product orientation Orderable part number ending ,547 or... se97tp
SE97BTP
PCT2075