TDA8007BHL: Multiprotocol IC card interface
The TDA8007BHL is a cost-effective card interface for dual smart card readers. Controlled through a parallel bus, it meets all requirements of ISO 7816, GSM 11-11, EMV4.2 and EMV 2000. It is addressed on a non-multiplexed 8-bit databus, by means of address registers AD0, AD1, AD2 and AD3. TDA8007BHL/C3 can be also addressed through a multiplexed access. The integrated ISO UART and the time-out counters allow easy use even at high baud rates with no real time constraints. Due to its chip select, external input/output and interrupt features, it greatly simplifies the realization of a reader of any number of cards. It gives the cards and the reader a very high level of security, due to its special hardware against ESD, short-circuiting, power failure, etc. The integrated step-up converter allows operation within a supply voltage range of 2.7 V to 6 V.
TDA8007BHL/C4 supports only non multiplex access and TDA8007BHL/C3 support both non multiplexed and multiplexed access.
TDA8007BHL: Product Block Diagram
Outline 3d SOT313-2
Data Sheets (1)
Application Notes (3)
Package Information (1)
Packing (1)
Supporting Information (1)
Ordering Information
| Product | Status | Package version | Analog interfaces | ISO 7816 UART | Host Interface | VCC card power supply (V) |
|---|
| TDA8007BHL/C4 | Active | SOT313-2 | 2 | yes | 8 bit parallel | 1.8 & 3 & 5 |
| TDA8007BHL/C3 | Active | SOT313-2 | 2 | yes | 8 bit parallel | 1.8 & 3 & 5 |
| TDA8007BHL/C1/S1 | No Longer Manufactured | SOT313-2 | 2 | yes | 8 bit parallel | 1.8 & 3 & 5 |
| TDA8007BHL/C2 | No Longer Manufactured | SOT313-2 | 2 | yes | 8 bit parallel | 1.8 & 3 & 5 |
| TDA8007BHL/C2/N | No Longer Manufactured | SOT313-2 | 2 | yes | 8 bit parallel | 1.8 & 3 & 5 |
| TDA8007BHL/C3/N | No Longer Manufactured | SOT313-2 | 2 | yes | 8 bit parallel | 1.8 & 3 & 5 |
| TDA8007BHL/C1 | No Longer Manufactured | SOT313-2 | 2 | yes | 8 bit parallel | 1.8 & 3 & 5 |
Package Information
