MC100E431: ECL 3-Bit Differential D Flip-Flop

The MC10E/100E431 is a 3-bit flip-flop with differential clock, data input and data output. The asynchronous Set and Reset controls are edge-triggered rather than level controlled. This allows the user to rapidly set or reset the flip-flop and then continue clocking at the next clock edge, without the necessity of de-asserting the set/reset signal (as would be the case with a level controlled set/reset). The E431 is also designed with larger internal swings, an approach intended to minimize the time spent crossing the threshold region and thus reduce the metastability susceptibility window. The differential input structures are clamped so that the inputs of unused registers can be left open without upsetting the bias network of the device. The clamping action will assert the Dbar and the CLKbar sides of the inputs. Because of the edge triggered flip-flop nature of the device simultaneously opening both the clock and data inputs will result in an output which reaches an unidentified but valid state. Note that the input clamps only operate when both inputs fall to 2.5 V below VCC. The 100 Series contains temperature compensation. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.

Features
  • Edge-Triggered Asynchronous Set and Reset
  • Differential D, CLK and Q; VBB Reference Available
  • 1100MHz Min. Toggle Frequency
  • PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V
  • NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V
  • Internal Input Pulldown Resistors
  • ESD Protection: > 1 kV HBM, > 75 V MM
  • Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
  • Moisture Sensitivity Level 1For Additional Information, see Application Note AND8003/D
  • Flammability Rating: UL-94 code V-0 @ 1/8",Oxygen Index 28 to 34
  • Transistor Count = 348 devices
  • Pb-Free Packages are Available
Application Notes (17)
Document TitleDocument ID/SizeRevisionRevision Date
AC Characteristics of ECL DevicesAND8090/D (896.0kB)1
Clock Generation and Clock and Data Marking and Ordering Information GuideAND8002/D (71kB)12
Clock Management Design Using Low Skew and Low Jitter DevicesTND301/D (205.0kB)0
Designing with PECL (ECL at +5.0 V)AN1406/D (105.0kB)2
ECL Clock Distribution TechniquesAN1405/D (54.0kB)1
ECLinPS and ECLinPS Lite SPICE I/O Modeling KitAN1503/D (120.0kB)6
ECLinPS™ Circuit Performance at Non-Standard VIH LevelsAN1404/D (51.0kB)1
Interfacing Between LVDS and ECLAN1568/D (121.0kB)11
Interfacing with ECLinPSAND8066/D (72kB)3
Metastability and the ECLinPS FamilyAN1504/D (103.0kB)3
Odd Number Divide By Counters with 50% Outputs and Synchronous ClocksAND8001/D (90.0kB)0
Phase Lock Loop General OperationsAND8040/D (64.0kB)3
Storage and Handling of Drypack Surface Mount DeviceAND8003/D (49kB)2Mar, 2016
Termination of ECL Logic DevicesAND8020/D (176.0kB)6
The ECL Translator GuideAN1672/D (142.0kB)12
Thermal Analysis and Reliability of WIRE BONDED ECLAND8072/D (119.0kB)5
Using Wire-OR Ties in ECLInPS™ DesignsAN1650/D (1130.0kB)3
Data Sheets (1)
Document TitleDocument ID/SizeRevisionRevision Date
5 V ECL 3-Bit Differential Flip-FlopMC10E431/D (162kB)11Jul, 2016
Simulation Models (1)
Document TitleDocument ID/SizeRevisionRevision Date
IBIS Model for MC100E431FNMC100E431FN.IBS (14.0kB)
Package Drawings (1)
Document TitleDocument ID/SizeRevision
28 LEAD PLCC776-02 (67.7kB)F
Order Information
ProductStatusCompliancePackageMSL*ContainerBudgetary Price/Unit
MC100E431FNR2GActivePb-free Halide freePLCC-28776-023Tape and Reel500Contact BDTIC
Specifications
ProductTypeBitsInput LevelOutput LevelVCC Typ (V)tJitter Typ (ps)tpd Typ (ns)tsu Min (ns)th Min (ns)trec Typ (ns)tR & tF Max (ps)fToggle Typ (MHz)
MC100E431FNR2GD-Type3ECLECL510.70.20.20.47001100
5 V ECL 3-Bit Differential Flip-Flop (162kB) MC10E431
AC Characteristics of ECL Devices NB100LVEP91
Clock Generation and Clock and Data Marking and Ordering Information Guide NB100LVEP91
Clock Management Design Using Low Skew and Low Jitter Devices MC10H604
Designing with PECL (ECL at +5.0 V) NB100LVEP91
ECL Clock Distribution Techniques NB100LVEP91
ECLinPS and ECLinPS Lite SPICE I/O Modeling Kit MC100EP91
ECLinPS™ Circuit Performance at Non-Standard VIH Levels MC10E195
Interfacing Between LVDS and ECL NB100ELT23L
Interfacing with ECLinPS NB100LVEP91
Metastability and the ECLinPS Family MC10EPT20
Odd Number Divide By Counters with 50% Outputs and Synchronous Clocks NUP4201
Phase Lock Loop General Operations MC10H604
Storage and Handling of Drypack Surface Mount Device NB3U23C
Termination of ECL Logic Devices NB100LVEP91
The ECL Translator Guide NB100LVEP91
Thermal Analysis and Reliability of WIRE BONDED ECL NB100LVEP91
Using Wire-OR Ties in ECLInPS™ Designs MC10H351
IBIS Model for MC100E431FN MC100E431
28 LEAD PLCC MC10H604