MC10E404: ECL Quad Differential AND/NAND Gate _ BDTIC a Leading Distributor in China

MC10E404: ECL Quad Differential AND/NAND Gate

The MC10E404/100E404 is a 4-bit differential AND/NAND device. The differential operation of the device makes it ideal for pulse shaping applications where duty cycle skew is critical. Special design techniques were incorporated to minimize the skew between the upper and lower level gate inputs. Because a negative 2-input NAND function is equivalent to a 2-input OR function, the differential inputs and outputs of the device also allow for its use as a fully differential 2 input OR/NOR function. The output RISE/FALL times of this device are significantly faster than most other standard ECLinPS devices resulting in an increased bandwidth. The differential inputs have clamp structures which will force the Q output of a gate in an open input condition to go to a LOW state. Thus, inputs of unused gates can be left open and will not affect the operation of the rest of the device. Note that the input clamp will take affect only if both inputs fall 2.5V below VCC.The 100 Series contains temperature compensation.

Features

Differential D and Q
700ps Max. Propagation Delay
High Frequency Outputs
PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V
NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V
Internal Input Pulldown Resistors
ESD Protection: > 1 kV HBM, > 75 V MM
Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
Moisture Sensitivity Level 1For Additional Information, see Application Note AND8003/D
Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
Transistor Count = 274 devices
Pb-Free Packages are Available

Application Notes (17)

Document Title	Document ID/Size	Revision	Revision Date
AC Characteristics of ECL Devices	AND8090/D (896.0kB)	1
Clock Generation and Clock and Data Marking and Ordering Information Guide	AND8002/D (71kB)	12
Clock Management Design Using Low Skew and Low Jitter Devices	TND301/D (205.0kB)	0
Designing with PECL (ECL at +5.0 V)	AN1406/D (105.0kB)	2
ECL Clock Distribution Techniques	AN1405/D (54.0kB)	1
ECLinPS and ECLinPS Lite SPICE I/O Modeling Kit	AN1503/D (120.0kB)	6
ECLinPS™ Circuit Performance at Non-Standard VIH Levels	AN1404/D (51.0kB)	1
Interfacing Between LVDS and ECL	AN1568/D (121.0kB)	11
Interfacing with ECLinPS	AND8066/D (72kB)	3
Metastability and the ECLinPS Family	AN1504/D (103.0kB)	3
Odd Number Divide By Counters with 50% Outputs and Synchronous Clocks	AND8001/D (90.0kB)	0
Phase Lock Loop General Operations	AND8040/D (64.0kB)	3
Storage and Handling of Drypack Surface Mount Device	AND8003/D (49kB)	2	Mar, 2016
Termination of ECL Logic Devices	AND8020/D (176.0kB)	6
The ECL Translator Guide	AN1672/D (142.0kB)	12
Thermal Analysis and Reliability of WIRE BONDED ECL	AND8072/D (119.0kB)	5
Using Wire-OR Ties in ECLInPS™ Designs	AN1650/D (1130.0kB)	3