NCP1361: Low Power Offline Constant Current PWM Current-Mode Controller

The NCP1361 offers a new solution targeting output power levels from a few watts up to 20 W in a universal-mains flyback application. Thanks to a novel method this new controller saves the secondary feedback circuitry for constant current regulation while achieving excellent line and load regulation with traditional opto coupler and TL431 voltage reference. The NCP1361 operates in valley lockout quasi-resonant peak current mode control mode at high load to provide high efficiency. When the power on the secondary side starts to diminish, the controller automatically adjusts the duty-cycle then at lower load the controller enters in pulse frequency modulation at fixed peak current with a valley switching detection. This technique allows keeping the output regulation with tiny dummy load. Valley lockout at the first 4 valleys prevent valley jumping operation and then a valley switching at lower load provides high efficiency.

Features
  • No frequency clamp, 80 or 110 kHz Maximum Switching Frequency
  • Quasi-Resonant with Valley Switching Operation
  • Fixed Peak Current & Deep frequency foldback @ light load operation
  • Wide Operation VCC range (up to 28 V)
  • Cycle by Cycle peak current limit
  • CS & Vs/ZCD pin Short and Open Protection
  • Internal Temperature Shutdown
  • Constant Current Primary-side feedback eliminates secondary controller
  • ±10% Current Regulation
  • Clamped Gate-drive Output for Mosfet
  • Built-in soft-start
  • Low Start-up current ( 2 μA typ.)
  • Less than 30 mW No-Load Performance at High Line
  • These are Pb-Free Devices
Benefits
  • Prevent high frequency interference with a touchscreen
  • QR architecture offers high efficiency operation
  • Low light load consumption
  • Design flexibility
  • Safe operation
  • Safe operation
  • Safe operation
Applications
  • AC-DC USB Charging
End Products
  • Cell Phones
  • Tablets
  • Portable Devices
Design & Development Tools (1)
Document TitleDocument ID/SizeRevisionRevision Date
NCP1360, NCP1361, NCP1365, NCP1366 Design Mathcad worksheetNCP1360 Design Worksheet Mathcad (508kB)2.1Apr, 2015
Data Sheets (1)
Document TitleDocument ID/SizeRevisionRevision Date
Low Power Offline Constant PWM Current-Mode Controler with/without High Voltage Startup Current SourceNCP1361/D (354kB)2Nov, 2016
Package Drawings (1)
Document TitleDocument ID/SizeRevision
TSOP-6318G-02 (64.1kB)V
Order Information
ProductStatusCompliancePackageMSL*ContainerBudgetary Price/Unit
NCP1361AABAYSNT1GActivePb-free Halide freeTSOP-6318G-023Tape and Reel3000$0.2267
NCP1361BABAYSNT1GActivePb-free Halide freeTSOP-6318G-023Tape and Reel3000$0.2267
NCP1361EABAYSNT1GActivePb-free Halide freeTSOP-6318G-023Tape and Reel3000$0.2267
NCP1361FABAYSNT1GProduct PreviewPb-free Halide freeTSOP-6318G-023Tape and Reel3000Contact BDTIC
Specifications
ProductTopologyControl Modefsw Typ (kHz)Stand-by ModeUVLO (V)Short Circuit ProtectionLatchSoft StartVCC Max (V)Drive Cap. (mA)
NCP1361AABAYSNT1GFlybackCurrent ModeVariableYes6.5YesYesYes282000 / 1000
NCP1361BABAYSNT1GFlybackCurrent ModeVariableYes6.5YesNoYes282000 / 1000
NCP1361EABAYSNT1GFlybackCurrent ModeVariableYes6.5YesNoYes282000 / 1000
NCP1361FABAYSNT1GFlybackCurrent ModeVariableYes6.5YesYesYes282000 / 1000
Low Power Offline Constant PWM Current-Mode Controler with/without High Voltage Startup Current Source (354kB) NCP1361
NCP1360, NCP1361, NCP1365, NCP1366 Design Mathcad worksheet NCP1365
TSOP-6 STF202