NCP360GEVB: USB Positive OVP Evaluation Board

NCP360 is able to disconnect the systems from its output pin incase wrong VBUS operating conditions is detected.The systemis positive overvoltage protected up to +20V. Thanks to this device using internal PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board. NCP360 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold (OVLO). NCP360 provides a negative going flag output, which alerts the system that a fault has occurred.In addition, the device has ESD protected input (15kV Air) when bypassed with a 1µF or larger capacitor.

Evaluation/Development Tool Information
ProductStatusComplianceShort DescriptionParts Used
NCP360GEVBActivePb-freeUSB Positive OVP Evaluation BoardNCP360MUTBG
Technical Documents
TypeDocument TitleDocument ID/SizeRev
Eval Board: BOMNCP360GEVB Bill of Materials ROHS CompliantNCP360GEVB_BOM_ROHS.PDF - 179.0 KB0
Eval Board: GerberNCP360GEVB Gerber Layout Files (Zip Format)NCP360GEVB_GERBER.ZIP - 43.0 KB0
Eval Board: SchematicNCP360GEVB SchematicNCP360GEVB_SCHEMATIC.PDF - 118.0 KB0
Eval Board: Test ProcedureNCP360GEVB Test ProcedureNCP360GEVB_TEST_PROCEDURE.PDF - 150.0 KB0
VideoUSB Positive OVP Evaluation Board - NCP360GEVBWVD17589/D
NCP360GEVB BOM ROHS NCP360GEVB
NCP360GEVB GERBER NCP360GEVB
NCP360GEVB SCHEMATIC NCP360GEVB
NCP360GEVB TEST PROCEDURE NCP360GEVB
NCP360GEVB