NCP380LSNAJAGEVB: High-Side Power Distribution Switch Evaluation Board

The NCP380 is a high-side power distribution switch designed for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 70 mΩ (DFN package), P channel MOSFET in a single package.The device limits the output current to a desired level by switching into a regulation current-mode when the output load exceeds the current-limit threshold or a short is present. The current limit threshold is either user adjustable between 100mA and 2.1A via an external resistor or internally fixed.The power switch rise and fall times are controlled to minimize current ringing during switching.An internal reverse-voltage detection comparator disables the power-switch if the output voltage is higher than the input voltage to protect devices on the input side of the switch. The /FLAG logic output asserts low during over current, reverse-voltage or over temperature conditions. The switch is controlled by a logic enable input active high or low.

Evaluation/Development Tool Information
ProductStatusComplianceShort DescriptionParts Used
NCP380LSNAJAGEVBActivePb-freeHigh-Side Power Distribution Switch Evaluation BoardNCP380LSNAJAAT1G
Technical Documents
TypeDocument TitleDocument ID/SizeRev
Eval Board: BOMNCP380LSNAJAGEVB Bill of Materials ROHS CompliantNCP380LSNAJAGEVB_BOM_ROHS.PDF - 78 KB0
Eval Board: GerberNCP380LSNAJAGEVB Gerber Layout Files (Zip Format)NCP380LSNAJAGEVB_GERBER.ZIP - 167.0 KB0
Eval Board: SchematicNCP380LSNAJAGEVB SchematicNCP380LSNAJAGEVB_SCHEMATIC.PDF - 32.0 KB0
Eval Board: Test ProcedureNCP380LSNAJAGEVB Test ProcedureNCP380LSNAJAGEVB_TEST_PROCEDURE.PDF - 81 KB0
VideoHigh-Side Power Distribution Switch Evaluation Board - NCP380LSNAJAGEVBWVD17063/D
NCP380LSNAJAGEVB BOM ROHS NCP380LSNAJAGEVB
NCP380LSNAJAGEVB GERBER NCP380LSNAJAGEVB
NCP380LSNAJAGEVB SCHEMATIC NCP380LSNAJAGEVB
NCP380LSNAJAGEVB TEST PROCEDURE NCP380LSNAJAGEVB
NCP380LSNAJAGEVB