NCS2302: Headset Detection Interface with Send/End Detect
The NCS2302 is a compact and cost effective headset detection interface IC. It integrates several circuit blocks to detect the presence of a stereo headset with a microphone and whether the send/end button has been pressed. The NMOS transistor on the MIC pin mutes the signal when the headset is not present. The built in resistor divider provides the reference voltage for detecting the left audio channel. When L_DET and GND_DET are pulled low, the logic low output of the OR gate indicates the headset has been connected properly and the MIC pull−down is disabled. A comparator is integrated for detecting the send/end button press. The NCS2302 comes in a space−saving
UQFN10 package (1.4 x 1.8 mm).
Features- Wide Supply Voltage for Headset Detection Circuit: VDD = 1.6 V to 2.5 V
- Wide Supply Voltage for S/E Comparator Circuit: VDD2 = 1.6 V to 2.8 V
- Low Quiescent Supply Current: 17 µA typical
- Low Impedance MIC Pull−Down: RDS(ON) = 0.45 Ω Typical
- Space Saving UQFN10 Package
| Benefits- Wide Range Allows for Design Flexibility
- Wide Range Allows for Design Flexibility
- Low quiescent current reduces impact on battery drain
- Reduces Pop & Click Noise
- Saves Space on Compact PCB Designs
|
Applications- Headset Detection
- Send/End Button Press Detection
| End Products- Cell Phones, Smartphones
- Tablets
- Notebooks
|
Data Sheets (1)
Package Drawings (1)
Order Information
| Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
|---|
| NCS2302MUTAG | Active | Pb-free
Halide free | UQFN-10 | 488AT | 1 | Tape and Reel | 3000 | $0.42 |
Specifications
| Product | Channels | VCC Min (V) | VCC Max (V) | IO Typ (mA) | ICC Typ (mA) | tres Typ (ns) | VIO Max (mV) | TA Min (°C) | TA Max (°C) |
|---|
| NCS2302MUTAG | 2 | 1.6 | 2.8 | 2 | 0.017 | 45 | | -40 | 85 |
