NCS2584: Video Amplifier, 4-Channel, with Load Detection and Signal Detection

The NCS2584 is a 4 channel high speed video driver with 6th order Butterworth Reconstruction filters on each channel. A first set of 3 channels has High Definition (HD) 34 MHz filters, one per channel. A fourth channel offers an extra driver for Cvbs type video signal with an 8 MHz filter. The NCS2584 is in fact a combination of a triple HD video driver plus a single Cvbs video driver. In addition, this four channel video driver integrates an auto shutdown function in order to detect the moment when the DAC is turned on or off. It also embeds a load detection to lower the power consumption when the TV is unplugged. To further reduce the layout and software complexity, the NCS2584 will automatically turn off without any external command. These features help significantly the systems like Blu-Ray players or Set Top Boxes to be in line with the restricting energy saving standards on standby modes. It is designed to be compatible with Digital to Analog Converters (DAC) embedded in most video processors. All channels can accept DC or AC coupled signals. In case of AC coupled inputs, the internal clamps are enabled. The outputs can drive both AC and DC coupled 150 ohms loads but also two loads of 150 ohms in parallel.

Features
  • 3 High Definition Filters with 6th Order Butterworth Filter and34 MHz Bandwidth for YPbPr 1080i
  • One Cvbs Driver Including 6th Order Butterworth 8 MHz Filter
  • Integrated Automatic Shutdown Function to Improve Power Consumption Savings When the DAC is Off
  • Integrated Load Detection for TV Presence
  • Low Pin Count for Layout Simplification
  • Internal Fixed Gain: 6 dB +/-0.2
  • AC or DC Coupled Inputs and Outputs
  • Each channel Capable to Drive 2 Loads of 150 ohms in Parallel
  • Operating Supply Voltage Range: +3.3 V and 5.0 V
  • TSSOP14 Package
Benefits
  • Drive High Definition Signal with good attenuation @ 74.25MHz (sampling rate of the DAC)
  • Drive Standard Definition Signal with good attenuation @ 27MHz (sampling rate of the DAC)
  • Reduce Icc when no input video signal is present
  • Reduce Icc by detecting if the TV is plugged
  • Remove the necessity of EN pins
  • Accuracy of Gain to keep image to flicker
  • Adaptability to customer design requirement
  • for SCART application
  • Cover both 3.3V and 5V architecture
  • Pin to Pin compatible with THS7373
Applications
  • Home Theatre
End Products
  • Set Top Box
  • Blu-Ray Player
Application Notes (2)
Document TitleDocument ID/SizeRevisionRevision Date
Integrated Load Detection for Video DriversAND9046/D (163.0kB)0
Integrated Input Auto-Detection Mode for Video DriversAND8473/D (156.0kB)0
Package Drawings (1)
Document TitleDocument ID/SizeRevision
TSSOP-14 WB948G-01 (39.6kB)C
Data Sheets (1)
Document TitleDocument ID/SizeRevisionRevision Date
Video Amplifier, 4-Channel, with Load Detection and Signal DetectionNCS2584/D (262.0kB)0
Order Information
ProductStatusCompliancePackageMSL*ContainerBudgetary Price/Unit
NCS2584DTBR2GActivePb-free Halide freeTSSOP-14948G-011Tape and Reel2500$0.42
Specifications
ProductChannelsGBW Typ (MHz)VCC Max (V)ID Typ (mA)TA Min (°C)TA Max (°C)
NCS2584DTBR2G434 85.540-4085
Video Amplifier, 4-Channel, with Load Detection and Signal Detection (262.0kB) NCS2584
Integrated Load Detection for Video Drivers NCS2584
Integrated Input Auto-Detection Mode for Video Drivers NCS2584
TSSOP-14 WB NLSX5014