NCV4279C: Linear Voltage Regulator, LDO, 150 mA, with Delay, Adjustable Reset and Sense Output
The NCV4279C is a 5.0 V precision micropower voltage regulator with an output current capability of 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.5 V at 100 mA. Low quiescent current is a feature drawing only 125 µA with a 1.0 mA load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active reset output RO with delay and a SI/SO monitor which can be used to provide an early warning signal to the microprocessor of a potential impending reset signal. The use of the SI/SO monitor allows the microprocessor to finish any signal processing before the reset shuts the microprocessor down. The active Reset circuit operates correctly at an output voltage as low as 1.0 V. The Reset function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The reset threshold voltage can be decreased by the connection of an external resistor divider to the RADJ lead. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions. If the application requires pullup resistors at the logic outputs Reset and Sense Out, the NCV4269C with integrated resistors can be used.
应用功能框图
特性- 5.0 V ±2.0% Output with 150 mA output current capability
- Active Reset Output Low Down to VQ=1.0V; Adjustable Reset Threshold
- Fault Protection: -40V Reverse Voltage Protection Short Circuit Protection Thermal overload protection
- Early Warning through SI/SO Leads, adjustable threshold via external resistor
- AEC Q100 Qualified
- Very Low Dropout Voltage
| 优势- Tight regulation limits
- Microprocessor power management feature, design flexibility
- No external components required to enable protections required within any automotive applications.
- Microprocessor power management feature: warns microprocessor of impending reset event or can also be used as a general purpose comparator.
- Meets automotive quality requirements
|
应用- Body and Chassis
Powertrain
Infotainment
| 终端产品 |
数据表 (1)
封装图纸 (1)
| Document Title | Document ID/Size | Revision |
|---|
| SOIC-14 NB | 751A-03 (58.9kB) | K |
产品订购型号
| 产品 | 状况 | Compliance | 具体说明 | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCV4279CD250R2G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | Linear Voltage Regulator, LDO, 150 mA, with Delay, Adjustable Reset and Sense Output | SOIC-14 | 751A-03 | 1 | Tape and Reel | 2500 | $0.5813 |
订购产品技术参数
| Product | Output | Polarity | VO (V) | IO Typ (A) | VI Max (V) | VDO Typ (V) | Iq Typ (mA) | PSRR (dB) | Noise (µVrms) |
|---|
| NCV4279CD250R2G | Single | Positive | 5 | 0.15 | 45 | 0.5 | 0.125 | | |
