NCV70522DQ: SPI Stepper Driver with Voltage Regulator

The NCV70522DQ is a micro-stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and a SPI interface with an external microcontroller. The NCV70522DQ features an internal current-translation table: it takes the next micro-step depending on the clock signal on the stepping input pin (NXT) and the status of the direction register or input pin (DIR). A reliable current control is achieved using an integrated proprietary PWM algorithm. The NCV70522DQ includes a so-called Speed and Load Angle (SLA) output, allowing the creation of stall detection algorithms and control loops to adjust torque and speed based on the motor's back electromotive force (BEMF). The NCV70522DQ is implemented in I2T100 technology, enabling both high voltage analog circuitry and digital functionality on the same chip. The device is fully compatible with automotive voltage and temperature requirements and suited to general purpose stepper motor applications in the automotive, industrial, medical and marine domains.

特性
  • Dual H-Bridge for 2 Phase Stepper Motors
  • Programmable Peak-Current up to 1.2 A Continuous (1.5 A ShortTime), Using a 5Bit Current DAC
  • On-Chip Current Translator
  • SPI Interface
  • Speed and Load-Angle Output
  • 7 Step Modes from Full-Step up to 32 Micro-Steps
  • Fully Integrated Current-Sense
  • PWM Current Control with Automatic Selection of Fast and Slow Decay
  • Low EMC PWM with Selectable Voltage Slopes
  • Active Fly-back Diodes
  • Full Output Protection and Diagnosis
  • Thermal Warning and Shutdown
  • Digital IOs Compatible with 5 V and 3.3 V Microcontrollers
  • Integrated 5 V Voltage Regulator to Supply an External Microcontroller
  • Integrated Reset Function to Reset External Microcontroller
  • Integrated Watchdog Function
  • These are PbFree Devices
应用注释 (4)
Document TitleDocument ID/SizeRevisionRevision Date
Current Range Switching using NCV7052xAND8372/D (122.0kB)1
How to Measure BEMF on the SLA pinAND8399/D (1389.0kB)2
Stepper Motor Driver Failure Diagnostics and ProtectionAND8403/D (147.0kB)0Oct, 2009
Stepper Motor Resonance Measurement Setup with the NCV7052x Evaluation KitAND8371/D (2937.0kB)1
数据表 (1)
Document TitleDocument ID/SizeRevisionRevision Date
Micro-Stepping Motor Driver, SSOP36NCV70522DQ/D (224kB)2
封装图纸 (1)
Document TitleDocument ID/SizeRevision
SSOP-36L EXPOSED PAD940AB (68.7kB)O
产品订购型号
产品状况Compliance具体说明封装MSL*容器预算价格 (1千个数量的单价)
NCV70522DQ004GActiveAEC Qualified PPAP Capable Pb-free Halide freeSPI Stepper Driver with Voltage RegulatorSSOP-36 EP940AB2Tube47联系BDTIC
NCV70522DQ004R2GActiveAEC Qualified PPAP Capable Pb-free Halide freeSPI Stepper Driver with Voltage RegulatorSSOP-36 EP940AB2Tape and Reel1500联系BDTIC
订购产品技术参数
ProductTypeVM Min (V)VM Max (V)VCC Min (V)VCC Max (V)IO Max (A)IO Peak Max (A)Step ResolutionControl TypeFeedback MethodCurrent SenseRegulator OutputFault DetectionFlyback ProtectionRDS(on) Typ (Ω)
NCV70522DQ004G
NCV70522DQ004R2G
Micro-Stepping Motor Driver, SSOP36 NCV70522DQ
Current Range Switching using NCV7052x AMIS-30543
How to Measure Bemf on the SLA-pin AMIS-30543
Stepper Motor Driver Failure Diagnostics and Protection AMIS-30543
Stepper Motor Resonance Measurement Setup with the NCV7052x Evaluation Kit AMIS-30543
SSOP-36L EXPOSED PAD NCV70627