NCV7240: 8 Channel Low-Side Relay Driver
The NCV7240 is an automotive eight channel low side driver providing drive capability up to 600 mA per channel. Output control is via a SPI port and offers convenient reporting of faults for open load (or short to ground), over load, and over temperature conditions. Additionally, parallel control of the outputs is addressable (in pairs) via the INx pins. A dedicated limp home mode pin (LHI) enables OUT1 thru OUT4 while disabling OUT5 thru OUT8. Each output driver is protected for over load current and includes an output clamp for inductive loads. The NCV7240 is available in a SSOP24 fused lead package.
Features- 8 Channels
- 600mA Low Side Drivers
- 16 bit SPI control
- Parallel Input Pins
- Power Up without Open Circuit Detection
- Low Quiescent Current
- Limp Home Functionality
- 3.3V and 5V compatible Digital Input Supply Range
- Fault Reporting of Open Load, Over Load, and Over Temperature
- Power On Reset
- Uniform output structure of all outputs on one side of the package.
- AEC-Q100 Qualified
| Benefits- Saves board space as compared to lower count drivers.
- Ideal current for driving 70 ohm relays.
- Able to report errors and is capable of daisy chain connections.
- Allows PWM operation.
- Allows for power up without LED load illumination.
- Meets stringent automotive module quiescent current requirements.
- Automotive system feature allowing the vehicle to maintain operation with a defective microprocessor.
- Suitible for both 3.3V and 5V microprocessor interfaces.
- The micropressor and report unusual activity for troubleshooting and system integrity perposes.
- Maintains a smooth system power up and power down.
- Simplifies printed circuit board layouts.
- Automotive requirement maintains site and change control.
|
Applications- Relay Driver
- LED Driver.
- Stepper Motor Driver
| End Products- Automotive Body Control Unit
- Automotive Engine Control Unit
|
Simulation Models (1)
Document Title | Document ID/Size | Revision | Revision Date |
---|
NCV7240 PSPICE MODEL | NCV7240 PSPICE MODEL (140.0kB) | 0 | |
Package Drawings (1)
Document Title | Document ID/Size | Revision |
---|
SSOP24 NB | 565AL (71.4kB) | O |
Data Sheets (1)
Order Information
Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
---|
NCV7240ADPR2G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | SSOP-24 | 565AL | 2 | Tape and Reel | 2000 | $0.8 |
NCV7240BDPR2G | Active, Not Rec | AEC Qualified
PPAP Capable
Pb-free
Halide free | SSOP-24 | 565AL | 2 | Tape and Reel | 2000 | |
NCV7240DPR2G | Active | AEC Qualified
PPAP Capable
Pb-free | SSOP-24 | 565AL | 2 | Tape and Reel | 2500 | Contact BDTIC |
Specifications
Product | Number of Drivers | VCC Max (V) | V(BR)GSS Max (V) | V(BR)DSS Max (V) | ID Max (A) | rDS(on) Max (Ω) | Tj Max (°C) |
---|
NCV7240ADPR2G | | | | | | | |
NCV7240DPR2G | 8 | 5.5 | | 36 | 0.6 | 3 | 150 |