NCV7710: Door Module Driver (Lock Driver)
The NCV7710 is a powerful Driver-IC for automotive body control systems. The IC is designed to control lock motor in the door of a vehicle. With the monolithic full-bridge driver stage, the IC is able to control lock motor. The NCV7710 is controlled thru a 24 bit SPI interface with in-frame response.
Features- Operating Range from 5.5 V to 28 V
- Two High-Side and Two Low-Side Drivers Connected as Halfbridges- 2 Half−bridges Iload = 6 A; Rdson = 150 mΩ @ 25°C
- Programmable Soft-start Function to Drive Loads with Higher Inrush Currents as Current Limitation Value
- Support of PWM Control Frequency Outside the Audible Noise
- Support of Active Freewheeling to Reduce Power Dissipation
- Multiplex Current Sense Analog Output for Advanced Load Monitoring
- Very Low Current Consumption in Standby Mode
- Charge Pump Output to Control an External Reverse Polarity Protection MOSFET
- 24-Bit SPI Interface for Output Control and Diagnostic
- Protection Against Short Circuit, Overvoltage and Overtemperature
- Downwards Pin-to-pin and SPI Registers Compatible with NCV7707
|
Applications- De-centralized Door Electronic Systems
- Rear Door Electronic Unit
- Body Control Units (BCUs)
- Several H−bridge Applications
| End Products |
Data Sheets (1)
Package Drawings (1)
Order Information
| Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
|---|
| NCV7710DQR2G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | SSOP-36 EP | 940AB | 3 | Tape and Reel | 1500 | Contact BDTIC |
Specifications
| Product | Number of Drivers | VCC Max (V) | V(BR)GSS Max (V) | V(BR)DSS Max (V) | ID Max (A) | rDS(on) Max (Ω) | Tj Max (°C) |
|---|
| NCV7710DQR2G | 2 | 28 | | | | 0.3 | 150 |
