NCV78763: Power Ballast and Dual LED Driver for Automotive Front Lighting 2nd gen / 1.6A
The NCV78763 is a single−chip, highly efficient smart power ballast and dual LED driver designed for automotive front lighting applications like high beam, low beam, daytime running light (DRL), turn indicator, fog light, static cornering and so on.
The NCV78763 is a best fit for high current LEDs and provides a complete solution to drive two strings up to 60 V, by means of two internal independent buck switch channel outputs, with a minimum of external components. For each individual LED channel, the output current and voltage can be customized according to the application requirements. An on−chip diagnostic feature for automotive front
lighting is provided, easing the safety monitoring from the microcontroller. The device integrates a current−mode voltage booster controller, realizing a unique input current filter with a limited BOM.
When more than two LED channels are required on one module, then two, three or more NCV78763 devices can be combined, with the possibility for the booster circuits to operate in multiphase−mode. This helps to further optimize the filtering effect of the booster circuit and allows a cost effective dimensioning for mid to high power LED systems.
Due to the SPI programmability, one single hardware setup can support multiple system configurations for a flexible platform solution approach.
Features- Single Chip Boost−Buck Solution
- Two LED Strings up to 60 V
- High Current Capability up to 1.6 A DC per Output
- High Overall System Efficiency
- Minimum of External Components
- Active Input Filter with Low Current Ripple from Battery
- Integrated Switched Mode Buck Current Regulator
- Integrated Boost Current−mode Controller
- Programmable Input Current Limitation
- Average Current Regulation Through the LEDs
- High Operating Frequencies to Reduce Inductor Sizes
- Integrated PWM Dimming with Wide Frequency Range
- Low EMC Emission for LED switching and dimming
- SPI Interface for Dynamic Control of System Parameters
|
Applications- Front Lighting High Beam and Low Beam
- Day time Running Light (DRL)
- Position or Park light
- Turn Indicator
- Fog Light and Static Cornering
| End Products |
Software (1)
Package Drawings (4)
Data Sheets (1)
Evaluation Board Documents (9)
Evaluation/Development Tool Information
| Product | Status | Compliance | Short Description |
|---|
| NV787630R1DAGEVB | Active | Pb-free | Power LED Boost-to-Buck 1.6A60V Evaluation Board |
| NV78763RLA11GEVK | Active | Pb-free | NCV78763 REFERENCE DESIGN LDM A Day Time Running Light (DRL)/ Position Light (PL) and Turn Indicator (TURN) Kit |
Order Information
| Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
|---|
| NCV78763DQ0R2G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | SSOP-36 EP | 940AB | 3 | Tape and Reel | 1500 | Contact BDTIC |
| NCV78763MW0R2G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | QFN-32 | 488AM | 3 | Tape and Reel | 5000 | Contact BDTIC |
| NCV78763MW1R2G | Active | AEC Qualified
PPAP Capable
Pb-free
Halide free | QFN-32 | 485ED | 3 | Tape and Reel | 2500 | Contact BDTIC |
Specifications
| Product | Topology | VIN Min (V) | VIN Max (V) | VO Max (V) | IO Max (mA) | fSW Typ (kHz) |
|---|
| NCV78763DQ0R2G | Step-Up/Step-Down | 4 | 40 | 68 | 1600
1900 | 350 |
| NCV78763MW0R2G | Step-Up/Step-Down | 4 | 40 | 68 | 1600
1900 | 350 |
| NCV78763MW1R2G | Step-Up/Step-Down | 4 | 40 | 68 | 1900
1600 | 350 |
