NLAS4051: Analog Multiplexer/Demultiplexer
The NLAS4051 is an improved version of the MC14051 and MC74HC4051 fabricated in sub-micron Silicon Gate CMOS technology for lower RDS(on) resistance and improved linearity with low current. This device may be operated either with a single supply ordual supply up to +/-3 V to pass a 6 VPP signal without couplingcapacitors.When operating in single supply mode, it is only necessary to tie VEE, pin 7 to ground. For dual supply operation, VEE is tied to a negative voltage, not to exceed maximum ratings.
Features- Improved RDS(on) Specifications
- Pin for Pin Replacement for MAX4051 and MAX4051A- One Half the Resistance Operating at 5.0 Volts
- Single or Dual Supply Operation- Single 2.5-5 Volt Operation, or Dual +/-3 Volt Operation- With VCC of 3.0 to 3.3 V, Device Can Interface with 1.8 V Logic, No Translators Needed- Address and Inhibit Logic are Over-Voltage Tolerant and May Be Driven Up +6 V Regardless of VCC.
- Improved Linearity Over Standard HC4051 Devices
- Popular SOIC, and Space Saving TSSOP, and QSOP 16 Pin Packages
- Pb-Free Packages are Available
|
Data Sheets (1)
Package Drawings (2)
Order Information
Product | Status | Compliance | Package | MSL* | Container | Budgetary Price/Unit |
---|
NLAS4051DR2G | Active | Pb-free
Halide free | SOIC-16 | 751B-05 | 1 | Tape and Reel | 2500 | Contact BDTIC |
NLAS4051DTR2 | Obsolete | Pb-free | TSSOP-16 | 948F-01 | 1 | Tape and Reel | 2500 | $0.4267 |
NLAS4051DTR2G | Active | Pb-free
Halide free | TSSOP-16 | 948F-01 | 1 | Tape and Reel | 2500 | Contact BDTIC |
NLAS4051DR2 | Last Shipments | | SOIC-16 | 751B-05 | 1 | Tape and Reel | 2500 | |
Specifications
Product | Channels | Number of Switches | Configuration | Icc Max (µA) | ron Max (Ω) | VCC Min (V) | VCC Max (V) |
---|
NLAS4051DR2G | 1 | 8 | SP8T | 80 | 37 | 2.5 | 5.5 |
NLAS4051DTR2G | 1 | 8 | SP8T | 80 | 37 | 2.5 | 5.5 |