| Part Name | Io (A) | Single/Multi Function | Target application | Activity | Output Format | Delay Circuit | Delay Time(ms) | Detection Type | Detection Voltage(V) | Reset Level | Operating Power-supply voltage Range(V) | Circuit Current (μA) | Function/Feature | Oper. Temp. (degC) max. | Package Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RNA53A30FUS | - | - | Peripheral for PC & MCU, Digital Consumer | System Monitor, Power supply | CMOS/ Open drain | External CR | 50ms or 100ms | Supply voltage (3.3V) | 3.05 | Low reset type | 2.5 to 5.5 | 0.01 | •Reset detection voltage 3.05V±1% •standard voltage 3.050V±0.8% •Delay time 50, 100ms (fine regulation by resistance is possible) •Corresponds to manual reset •Sleep mode is installed | -40 to +85 | SSOP-8 |
| RNA53A27FUS | - | - | Peripheral for PC & MCU, Digital Consumer | System Monitor, Power supply | CMOS/ Open drain | External CR | 50ms or 100ms | Supply voltage (3.3V) | 2.745 | Low reset type | 2.5 to 5.5 | 0.01 | •Reset detection voltage 2.745V±1% •standard voltage 3.050V±0.8% •Delay time 50, 100ms (fine regulation by resistance is possible) •Corresponds to manual reset •Sleep mode is installed | -40 to +85 | SSOP-8 |
| RNA52A10T | 30 | Multi | Peripheral for PC & MCU, Digital Consumer | System Monitor, Power supply | Open drain | Ch1 : Ch2 : External CR | 11 (CD=0.3μF, RD=39kΩ) | Input voltage | 1 | Low reset type | 1.4 to 6 | 1.1 | • Low voltage detection(1.0V↑) • Manual reset available(ch2) | -40 to +85 | TSSOP-8 |
| RNA50C27A | 25 | - | MCU with two VDD | - | CMOS/ Open drain | External CR | 93 (Cext=0.1μF, Rext=1MΩ) | Supply voltage (3.3V) | 2.7 | Low reset type | 2.7 to 4.6 | 2 | • 3.3V/1.8V power supply control • Delay time can be changed • Reset out : CMOS or Open drain can be selected | -40 to +85 | MMPAK8 |
| RNA52A10MM | 30 | Multi | Peripheral for PC & MCU, Digital Consumer | System Monitor, Power supply | Open drain | Ch1 : Ch2 : External CR | 11 (CD=0.3μF, RD=39kΩ) | Input voltage | 1 | Low reset type | 1.4 to 6 | 1.1 | • Low voltage detection(1.0V↑) • Manual reset available(ch2) | -40 to +85 | MMPAK8 |
For microcomputers that generally have restrictions on the order in which multiple voltages are turned on, complex circuit design was needed for controlling the order of rise and fall between power supplies. The RNA50C27 for SH microcontrollers was created to simplify this. In addition, a reset IC containing two circuits, the RNA52A10, can use an external resistor to set detection voltage, which is something that could not be done with previous CMOS products. It can also combine with another IC to perform sequence control of three power supplies.
