Automotive IPS series 1ch High-side switch - BD1HD500EFJ-C
BD1HD500EFJ-C is an Automotive 1ch High-Side switch. It has a built-in overcurrent protection circuit, Thermal Shut Down (TSD) circuit, Open Load Detection circuit, Under Voltage Lock Out circuit, and has diagnostic (ST) output function at the time during abnormal detection.
| Part Number | Status | Package | Unit Quantity | Minimum Package Quantity | Packing Type | RoHS |
|---|
|
| BD1HD500EFJ-CE2 | Active | HTSOP-J8 | 2500 | 2500 | Taping | Yes |
BD1HD500EFJ-C Data Sheet
Specifications| Grade | Automotive | | Channel Number [ch] | 1 | | Drain-Source Voltage (Max.)[V] | 44.5 | | Output Current[A] | 0.8 | | ON Resistance [mΩ] | 500 | | Over Current Detect [A] | 0.8 | | Active Clamp Energy [mJ] | 33.0 | | Supply Voltage(Min.)[V] | 4 | | Supply Voltage(Max.)[V] | 18 | | Current consumption(Typ.)[µA] | 1500 | | Thermal Shut Down | Self-restart | | Open Load Detect [V] | 2.8 | | Status Terminal | Available | | Junction Temperature Tj (Min.)[°C] | -40 | | Junction Temperature Tj (Max.)[°C] | 150 |
| Technical DocumentsFeatures- Built-in overcurrent protection circuit
- Built-in Thermal Shut Down (TSD)
- Built-in Open Load Detection circuit (When Output is OFF)
- Possibility to control directly from CMOS logic IC
- Low standby current
- Built-in Under Voltage Lock Out circuit
- Built-in diagnostic (ST) output function
- Low On resistance of RDS (ON) =500mΩ (Typ) (VDD=12V, Ta=25°C, IOUT=0.25A)
- Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip
- 1ch High-side switch for the mechanical relay coil drive
- AEC-Q100 qualified
|
Related Product
