Termination Regulator for DDR-SDRAMs - BD3539NUX
BD3539NUX is a termination regulator that complies with JEDEC requirements for DDR1-SDRAM, DDR2-SDRAM, and DDR3-SDRAM. This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability of up to 1A and has a power supply bias requirement of 3.3 V (for DDR2 and DDR3) and 5.0 V (for DDR1, DDR2, and DDR3) for driving the N-channel MOSFET. By employing an independent reference voltage input (VDDQ) and a feedback pin (VTTS), this termination regulator provides excellent output voltage accuracy and load regulation as required by JEDEC standards. Additionally, BD3539 has a reference power supply output (VREF)for DDR-SDRAM or for memory controllers. Unlike the VTT output that goes to "Hi-Z" state, the VREF output is kept unchanged when EN input is changed to "Low", making this IC suitable for DDR-SDRAM under "Self Refresh" state.
| Part Number | Status | Package | Unit Quantity | Minimum Package Quantity | Packing Type | RoHS |
|---|
|
| BD3539NUX-TR | Active | VSON008X2030 | 4000 | 4000 | Taping | Yes |
BD3539NUX Data Sheet
Specifications| Grade | Standard | | ch | 1 | | Vin(Min.)[V] | 2.7 | | Vin(Max.)[V] | 5.5 | | Vout (Typ.) [V] | 0.75 to 1.25 | | Iout(Max.)[A] | 1.0 | | Thermal Shut-down | Recover | | Under Voltage Lock Out | Yes | | Soft Start | Yes | | Operating Temperature (Min.)[°C] | -30 | | Operating Temperature (Max.)[°C] | 100 |
Applications- Coin Processing Machines
- Embedded PC
- MFP(Multi Function Printer)
- Car Navigation
- PLC (Programmable Logic Controller)
- Surveillance Camera for Network
- DVR/DVS
- Notebook PC
- Netbook
| Technical Documents |
Related Product
