PWM Control Type DC/DC Converter IC for AC/DC Driver - BD7679G

BD7679G is a PWM controller type DC/DC converter IC for AC/DC that provides an optimum system for all products that requires an electrical outlet. This product supports both isolated and non-isolated devices. IC enables simple design of low-power electrical converters. With switching MOSFET and current detection resistor as external devices, it enables more freedom in design. Since the peak current control is utilized, peak current is controlled in each cycles, application excels wide bandwidth and transient response. BD7679G includes various protective functions such as soft start function, burst function, per-cycle over current limiter, VCC overvoltage protection and overload protection. An external stop pin (COMP pin) is provided, so that switching stopping can be set by external signals. The function is available as overheating protection and over voltage protection of secondary output, so on. The PWM switching frequency is fixed at 65 kHz. A frequency hopping function is included which contributes to low EMI.

Part NumberStatusPackageUnit QuantityMinimum Package QuantityPacking TypeRoHS
BD7679G-GTRActiveSSOP630003000TapingYes

BD7679G Data Sheet

Specifications
FET-
Controller TypePWM
Vin1(Min.)[V]8.5
Vin1(Max.)[V]25.0
SW frequency(Max.)[KHz]65.0
Vcc OVPAuto Restart
BR PIN-
Channel1
Light Load modeYes
ENNo
Soft StartYes
Thermal Shut-downYes
Under Voltage Lock OutYes
Operating Temperature (Min.)[°C]-40
Operating Temperature (Max.)[°C]85
Technical Documents
Features
  • PWM frequency of 65kHz
  • PWM current mode method
  • Low circuit current when UVLO is ON (12µA at VCC=12V)
  • Low circuit current without load (Burst operation when load is light)
  • Built-in SW frequency hopping function
  • 250ns leading-edge blanking
  • VCC UVLO / OVP (Auto restart)
  • Per-cycle over current protection circuit
  • Soft start
  • Output overload protection (Auto-restart protection)
  • External stop function for COMP pin (Auto restart)
Related Product
PART NUMBERProduct SeriesDatasheet
BD9528AMUVBuck Converters (Synchronous & Controller)Datasheet
BD9528AMUV2 Channel Output Switching RegulatorsDatasheet
BD4271FP2-CLDO Regulators with Watch-Dog TimerDatasheet
BD42530EFJ-CVoltage TrackersDatasheet
BD42530FP2-CVoltage TrackersDatasheet
BD37201NUXSingle-Output LDO RegulatorsDatasheet
BD7679G BD7679G
BD9528AMUV BD9528AMUV
BD4271HFP-C BD4271HFP-C
BD42530FP2-C BD42530FP2-C
BD37201NUX BD37201NUX
Application Note BA12004BF
Part Explanation BA12004BF