ISO8200BQ:Galvanic isolated octal high-side smart power solid state-relay

The ISO8200BQ is a galvanic isolated 8-channel driver featuring a very low supply current. It contains 2 independent galvanic isolated voltage domains (Vcc for the power stage and Vdd for the digital stage). Additional embedded functions are: loss of GND protection, undervoltage shutdown with hysteresis, and reset function for immediate power output shutdown.

IC is intended to drive any kind of load with one side connected to ground. Active channel current limitation combined with thermal shutdown, (independent for each channel), and automatic restart, protect the device against overload and short-circuit. In overload conditions, if junction temperature overtakes threshold, the channel involved is turned off and on again automatically after the IC temperature decreases below a reset threshold. If this condition causes case temperature to reach TCR limit threshold, the overloaded channel is turned off and it only restarts when case and junction temperature decrease down to the reset thresholds. Non-overloaded channels continue operating normally. An internal circuit provides an OR-wired not latched common FAULT indicator signaling the channel OVT. The FAULT pin is an open drain active low fault indication pin.

Key Features

  • Parallel input interface
  • Direct and synchronous control mode
  • High common mode transient immunity
  • Output current: 0.7 A per channel
  • Short-circuit protection
  • Channel overtemperature protection
  • Thermal independence of separate channels
  • Common output disable pin
  • Case overtemperature protection
  • Loss of GNDcc and Vcc protection
  • Undervoltage shutdown with auto restart and hysteresis
  • Overvoltage protection (Vcc clamping)
  • Very low supply current
  • Common fault open drain output
  • 5 V and 3.3 V TTL/CMOS compatible I/Os
  • Fast demagnetization of inductive loads
  • Reset function for IC output disable
  • ESD protection
  • IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 and IEC 61000-4-8 compliant
Product Specifications
DescriptionVersionSize
DS10781: Galvanic isolated octal high-side smart power solid state-relay3.0765 KB
Selection Guides
DescriptionVersionSize
Intelligent power switches (IPS)09.20161023 KB
Brochures
DescriptionVersionSize
Brochure Power management guide05.20164 MB
Evaluation Tool Software
Part NumberManufacturerDescription
STSW-IFP001IPS Evaluation Tool
Solution Evaluation Tools
Part NumberManufacturerDescription
STEVAL-PCC009V2IBU Motor Control & IPS universal interface
Sample & Buy
Part NumberPackagePacking TypeUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
ISO8200BQTFQFPN 11.0X9.0X1.05 32LTray--NECEAR99-
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
ISO8200BQTFQFPN 11.0X9.0X1.05 32LIndustrialEcopack2
Galvanic isolated octal high-side smart power solid state-relay ISO8200BQ
Interface circuit - relay and lamp-driver TDE1737
Very low drop voltage regulators with inhibit KFXX