L6229Q:DMOS driver for three-phase brushless DC motor

The L6229Q is a DMOS fully integrated three-phase motor driver with overcurrent protection.

Realized in BCDmultipower technology, the device combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip.

The device includes all the circuitry needed to drive a three-phase BLDC motor including: a three-phase DMOS bridge, a constant off time PWM current controller and the decoding logic for single ended hall sensors that generates the required sequence for the power stage.

Available in VFQFPN-32 5 x 5 package, the L6229Q features a non-dissipative overcurrent protection on the high side power MOSFETs and thermal shutdown.

Key Features

  • Operating supply voltage from 8 to 52 V
  • 2.8 A output peak current (1.4 A RMS)
  • RDS(on) 0.73 Ω typ. value @ TJ = 25 °C
  • Operating frequency up to 100 kHz
  • Non dissipative overcurrent detection and protection
  • Diagnostic output
  • Constant tOFF PWM current controller
  • Slow decay synchronous rectification
  • 60° and 120° hall effect decoding logic
  • Brake function
  • Cross conduction protection
  • Thermal shutdown
  • Under voltage lockout
  • Integrated fast free wheeling diodes
Product Specifications
DescriptionVersionSize
DS5988: DMOS driver for three-phase brushless DC motor3.1517 KB
Application Notes
DescriptionVersionSize
AN3134: EVAL6229QR demonstration board using the L6229Q DMOS driver for a three-phase BLDC motor control application1.4710 KB
Design Notes & Tips
DescriptionVersionSize
DT0045: Design made easy with DC & BLDC motor driver tools1.2400 KB
DT0001: Speed control using the L6235 or L6229 with a PWM output from a microcontroller1.1124 KB
Presentations
DescriptionVersionSize
An introduction to electric motors1.02 MB
Selection Guides
DescriptionVersionSize
STSPIN motor drivers09.20162 MB
Brochures
DescriptionVersionSize
Motor Control Reference Guide15.102 MB
Products and Solutions for Factory Automation and Control1.03 MB
Solution Evaluation Tools
Part NumberManufacturerDescription
EVAL6229PDL6229 DMOS Driver for Three-Phase Brushless DC Motor Evaluation Board
Sample & Buy
Part NumberQuantityUnit Price (US$) *PackagePacking TypeOperating Temperature (°C) (min)Operating Temperature (°C) (max)ECCN (EU)ECCN (US)Country of Origin
L6229Q10001.805VFQFPN 32 5x5x1.0Tray-40150NECEAR99PHILIPPINES
L6229QTR10002.235VFQFPN 32 5x5x1.0Tape And Reel-40150NECEAR99PHILIPPINES
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
L6229QVFQFPN 32 5x5x1.0IndustrialEcopack2md_42-wspc-vfqfpn-wspc-5x5x1.0-wspc-32l-wspc-pitch-wspc-0.5_8n42-wspc-ur38ba6.pdf
md_42-wspc-vfqfpn-wspc-5x5x1.0-wspc-32l-wspc-pitch-wspc-0.5_8n42-wspc-ur38ba6.xml
L6229QTRVFQFPN 32 5x5x1.0IndustrialEcopack2md_42-wspc-vfqfpn-wspc-5x5x1.0-wspc-32l-wspc-pitch-wspc-0.5_8n42-wspc-ur38ba6.pdf
md_42-wspc-vfqfpn-wspc-5x5x1.0-wspc-32l-wspc-pitch-wspc-0.5_8n42-wspc-ur38ba6.xml
DMOS driver for three-phase brushless DC motor L6229Q
circuit_diagram_15209_thumbnail.png L6229Q
EVAL6229QR demonstration board using the L6229Q DMOS driver for a three-phase BLDC motor control application L6229Q
Design made easy with DC & BLDC motor driver tools L6230
Speed control using the L6235 or L6229 with a PWM output from a microcontroller L6229
Planning for easy troubleshooting with your L647x, L648x, or PowerStep01 design L6258EA
Planning for easy troubleshooting with your L647x, L648x, or PowerStep01 design L6258EA
STEVAL-IPM07F motor control power board based on the SLLIMM™ 2nd series of IGBT IPMs STEVAL-IPM07F
STEVAL-SPIMD20V1 demonstration kit based on the SPIMD20 integrated motor drive STEVAL-SPIMD20V1
md_42-wspc-vfqfpn-wspc-5x5x1.0-wspc-32l-wspc-pitch-wspc-0.5_8n42-wspc-ur38ba6.pdf L6229Q
md_42-wspc-vfqfpn-wspc-5x5x1.0-wspc-32l-wspc-pitch-wspc-0.5_8n42-wspc-ur38ba6.xml L6229Q
L6229Q